Advertisement

Quick Links

INSTALLATION AND

OPERATION INSTRUCTIONS

27" ELECTRIC FIREPLACES
27" Electric Fireplaces
P/N 900273-00 Rev. NC 11/2015
MODELS
ERT3027
CAPELLA 27
This manual will enable you to obtain a safe, effi cient and dependable
installation and operation of your electric fi replace. Please read and
understand these instructions before beginning your installation.
Do not alter or modify this fi replace or its components under any circum-
stances. Any modifi cation or alteration of the fi replace system, including
but not limited to the fi replace and accessories, may void the warranty,
listings and approvals of this system and could result in an unsafe and
potentially dangerous installation.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE.
IHP ELECTRIC FIREPLACES ARE DESIGNED FOR USE AS A
DECORATIVE APPLIANCE AND/OR AS A SUPPLEMENTAL HEATER.
THEY ARE NOT INTENDED FOR CONTINUOUS USE AS A PRIMARY
HEAT SOURCE.
A French manual is available upon request. Order P/N 900276-00
Ce manuel d'installation est disponible en francais, simplement en
faire la demande. Numéro de la pièce 900276-00.
INSTALLER: leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
®
C
US
SPARK 27
MPE27-2
CSA Report No. 1692948

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the capella 27 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IHP capella 27

  • Page 1: Operation Instructions

    DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. IHP ELECTRIC FIREPLACES ARE DESIGNED FOR USE AS A DECORATIVE APPLIANCE AND/OR AS A SUPPLEMENTAL HEATER. THEY ARE NOT INTENDED FOR CONTINUOUS USE AS A PRIMARY HEAT SOURCE.
  • Page 2: Table Of Contents

    In selecting this Innovative Hearth Products (IHP) electric fi replace, you have chosen operating and unattended. the fi nest and most dependable fi replace found anywhere. A beautiful and prestigious addition to the fi...
  • Page 3: Locating Fireplace

    TOOLS AND BUILDING SUPPLIES NEVER LOCATE THIS APPLIANCE WHERE LOCATING YOUR IHP ELECTRIC NORMALLY REQUIRED IT COULD FALL INTO A BATHTUB OR FIREPLACE OTHER WATER CONTAINER. Your new fi replace may be installed into existing TOOLS: framing or built into a wall (see Figure 1), or...
  • Page 4: Framing Specifi Cations

    FRAMING SPECIFICATIONS 22-1/2" (572 mm) Electrical Junction 32" (833 mm) 25" (635 mm) Electrical 51-1/4" 2 x 4 Junction (1302 mm) (On Right Side) 25" 31-1/4" 31-1/4" (635 mm) (794 mm) (794 mm) Corner View 4" (102 mm) 11" Note: Framing dimensions are calculated for an in front of the (280 mm) wall front face installation with finish dry wall in place.
  • Page 5: Clearances

    FINAL FINISHING FIREPLACE SPECIFICATIONS WARNING Materials such as brick and tile can be extended Model: Capella 27 To prevent contact with sag- down to the top of the fi replace. Do not extend Model: ERT3027 ging or loose insulation, the...
  • Page 6: Operating Instructions

    NEW CONSTRUCTION OR RENOVATION Flame Control 1. Select a location that is not prone to moisture Button and is located at least 3 feet (or 0.9m) away ON/OFF Power from combustible materials such as curtains Button or drapes, furniture, bedding, paper, etc. 2.
  • Page 7: Back Glass

    fl ame generation assembly. Cotter Pin Cotter Pin • Replacement LED strips are available through IHP (see Page 16). 1. Turn off power to the fi replace. 2. Let the fi replace cool, if it has been operat- Figure 14 ing.
  • Page 8: Product Reference Information

    78 lbs 27" Electric Fireplace Capella 27 1508 Elm Hill Pike, Suite 108 Nashville, TN 37210 27" Electric Fireplace 78 lbs ERT3027 visit us at IHP.us.com 27" Electric Fireplace 78 lbs Spark 27 27" Electric Fireplace MPE 27-2 78 lbs. TROUBLESHOOTING...
  • Page 9: Replacement Parts

    REPLACEMENT PARTS ITEM DESCRIPTION 27" Electric Fireplaces CAT. NO. PCB LED H20 H9120 Circuit Board and Remote Control Sensor H3863 Glass Mirror H3864 Blower, Heating Element, and Access Panel Assembly H3865 Fuse Plate Assembly (5 each) H5043 Flame Cylinder Assembly LED 27 H9121 Flame Motor H3867...
  • Page 10 NOTES...
  • Page 11: Warranty Certifi Cate

    In order for any claim under this warranty to be valid, you must contact the IHP dealer/distributor from which you purchased the product. If you cannot locate the dealer/ distributor, then you must notify IHP in writing. IHP must be notifi ed of the claimed defect in writing within 90 days of the date of failure. Notices should be directed to the IHP Warranty Department at 1508 Elm Hill Pike, Suite 108;...
  • Page 12 IHP reserves the right to make changes at any time, without notice, in design, materials, specifi cations, prices and also to discontinue colors, styles and products. Consult your local distributor for fi replace code information. Printed in U.S.A. © 2015 Inovative Hearth Products Rev.

This manual is also suitable for:

Spark 27Ert3027Mpe27-2

Table of Contents