Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Mahlkonig Guatemala K32S
Summary of Contents for Mahlkonig Guatemala K32S
-
Page 1: Operating Instructions
L A D E N M Ü H L E N S H O P G R I N D E R Operating Instructions Guatemala (K32S / K22S) the casual one“ ” The professional art of grinding since 1924 Coffee Laboratory 589 Rappahannock Drive White Stone Va 22578 TEL (866) 244-1578 www.coffeelabequipment.com... - Page 2 L A D E N M Ü H L E N S H O P G R I N D E R Coffee Laboratory 589 Rappahannock Drive White Stone Va 22578 TEL (866) 244-1578 www.coffeelabequipment.com...
-
Page 3: Table Of Contents
L A D E N M Ü H L E N S H O P G R I N D E R Table of Contents 7. Operating Faults 1. Safety 1.1 Symbols 8. Recalibration of the Grind Adjustment 1.2 Safety Instructions 1.3 Purpose of Use 9. -
Page 4: Safety
L A D E N M Ü H L E N S H O P G R I N D E R 1. Safety Always pull the power supply plug out of the outlet before carrying out any maintenance or cleaning work on the grinder. Please read and observe the following operating in- structions carefully. -
Page 5: Purpose Of Use
L A D E N M Ü H L E N S H O P G R I N D E R 1.3 Purpose 2. Technical Data Only cleaned, unground material, for which the Guatemala grinder has been set up for, is allowed to be ground in the grinder. Never use the Description Guatemala grinding mechanism to grind other products or objects. -
Page 6: Description
L A D E N M Ü H L E N S H O P G R I N D E R 3. Description The main components and operating elements are shown in the figure. Pos. 1 Hopper with lid Pos. -
Page 7: Safety Devices
L A D E N M Ü H L E N S H O P G R I N D E R 4. Safety devices 5. Set-up and Basic Adjustment Thermal overload circuit breaker 5.1 Setting-up Area (not for 115V/60Hz and 100V/60Hz) The motor of the grinder is protected by an overload circuit breaker, Place the grinder on a level surface free from vibration. -
Page 8: Operation
L A D E N M Ü H L E N S H O P G R I N D E R Therefore clean the grinder before the first operation with the enclosed 7. Operating faults grinder cleaner GRINDZ™. Follow the manual on the instruction leaflet. Defect Cause Remedy... - Page 9 L A D E N M Ü H L E N S H O P G R I N D E R Defect Cause Remedy Defect Cause Remedy The grinder does The power supply Insert the plug into the out- Grinder rotates but Carrier breakage.
-
Page 10: Recalibration Of The Grind Adjustment
L A D E N M Ü H L E N S H O P G R I N D E R 8. Recalibration of the Grind Adjustment If the adjustment you have made does not come up to your expecta- tions you can adjust the grind degree as described above. -
Page 11: Cleaning With Grindz™ Grinder Cleaner
L A D E N M Ü H L E N S H O P G R I N D E R 9.1 Cleaning with GRINDZ™ Grinder Cleaner We recommend cleaning your shop grinder once a month with our Pull out the power supply plug ! GRINDZ™... -
Page 12: Maintenance And Repair
L A D E N M Ü H L E N S H O P G R I N D E R During re-assembly, no ground material should stick 10.1 Grinding Disc Replacement to the surfaces where the grinder casing and the If the grind capacity decreases and the ground coffee is hot and of irregu- grinder casing touch each other. -
Page 13: Certificate
L A D E N M Ü H L E N S H O P G R I N D E R 12. Certificate 13. Warranty Conditions The warranty period is 1 year from the date of purchase. EC Declaration of Conformity The warranty covers all damages that can be attributed to inferior The manufacturer: MAHLKÖNIG GmbH &... -
Page 14: Wiring Diagram
L A D E N M Ü H L E N S H O P G R I N D E R 14. Wiring Diagram C1 Motor Start Capacitor 180μF 240V 50/60Hz with discharge resistor 4,7k K1 Motor Start Relay Klixon 2CR3 207 F1 Current Overload Switch ETA 2-5700IG1-P10-1050-7A S1 Switch ETA 3120-F30F-G701-SGRX-20A M1 Motor Elnor 270 CII 230V 50Hz... - Page 15 L A D E N M Ü H L E N S H O P G R I N D E R Notes Coffee Laboratory 589 Rappahannock Drive White Stone Va 22578 TEL (866) 244-1578 www.coffeelabequipment.com...
- Page 16 L A D E N M Ü H L E N S H O P G R I N D E R MAHLKÖNIG GmbH & Co. KG Tilsiter Straße 142 D- 22047 Hamburg, Germany Tel.: +49 (0)40 / 69 69 40-0 Fax: +49 (0)40 / 69 39 721 office@mahlkoenig.de ;...