Mahlkonig PEAK Operating Instructions Manual

Mahlkonig PEAK Operating Instructions Manual

Single espresso grinder

Advertisement

h O R e C a | G a S T R O G R I n D e R

Operating Instructions

PEAK Single Espresso Grinder
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEAK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mahlkonig PEAK

  • Page 1: Operating Instructions

    O R e C a | G a S T R O G R I n D e R Operating Instructions PEAK Single Espresso Grinder...
  • Page 2 H O R E C A | G A S T R O G R I N D E R Dear Customer / service personnel the „Single Espresso Grinder PEAK“ is a fully automatic espresso coffee grinder of the proven Mahlkönig quality.
  • Page 3: Table Of Contents

    H O R E C A | G A S T R O G R I N D E R Table Of COnTenTS 7. Operating faults 1. Safety 1.1 Symbols 8. Cleaning 1.2 Safety instructions 8.1 Cleaning with GRINDZ™ grinder cleaner 1.3 Usage purpose 8.2 Cleaning the grinder placement surface 1.4 User requirements...
  • Page 4: Safety

    (including children) with limited physical, Only whole roasted coffee beans may be ground sensory or mental capabilities or for lack of experi- in the PEAK. ence and/or for lack of knowledge, unless they are When unpacking please inspect whether the...
  • Page 5: Usage Purpose

    100-120V / 50/60Hz 1.3 Usage Purpose 200-240V / 50/60Hz Only whole, unground roasted, cleaned coffee beans may be ground in the PEAK grinder. Never use the grinder to grind other Rotation @ 50Hz: 900 rpm products or objects. @ 60Hz: 1100 rpm...
  • Page 6: Description

    h O R e C a | G a S T R O G R I n D e R 3. DeSCRIPTIOn The main components and operating elements are pictured in the illustration. 1 Hopper with lid 2 Lock screw for hopper 3 Grinding fi neness adjustment, with adjustment screw 4 Lock screw for grinding adjustment lid 5 Grind adjustment lid...
  • Page 7: Safety Devices Of The Grinder

    H O R E C A | G A S T R O G R I N D E R 4. SafeTy DevICeS Of The GRInDeR 5. SeT-UP anD baSIC aDjUSTmenT A grinding test run is carried out on each grinder in our factory. Thermal overload circuit breaker This is why you may find ground material residue in the grinding The motor of the grinder is protected by a thermal overload circuit...
  • Page 8: Electrical Installation

    Refasten the screws, item 13. Insert the plug into the corresponding grounded outlet. 6. Operation Only use the PEAK espresso grinder for whole roasted coffee 5.4 adjustment of the portafilter rest beans. See chapter 1.3. The grinder is designed so that most off different portafilter from various espresso machines fit into the rest, item 12, for hands- Observe the safety instructions under 1.2!
  • Page 9: Handling The Grinder

    H O R E C A | G A S T R O G R I N D E R 6.1 handling the grinder quantity or grinding time is available once again. Proper operation necessitates the steps described in the follow- 6.2 Grind adjustment (grinding fineness) ing: Adjust the grinding fineness by loosen the adjustment screw and...
  • Page 10: Adjustment Of Grinding Time

    H O R E C A | G A S T R O G R I N D E R 6.3 adjustment of grinding time (=amount of coffee) ICON EXPLANATION The factory setting for the grinding times is 2,8 seconds for the single shot and 5.2 seconds for the double shot.
  • Page 11: Software Menu

    H O R E C A | G A S T R O G R I N D E R DIsPLAy ICONs MAIN MENU (Example view) To enter the menu Press and hold for 3 sec Single shot mode on Grinding time Default settings 0 0 0...
  • Page 12 H O R E C A | G A S T R O G R I N D E R ZähLEr EINsTELLuNgEN LIghT sETTINgs 0 0 0 Single shot counter: Light ON shows the total number of all single shots - can be reset Double shot counter: shows the total number of Color change OFF...
  • Page 13 H O R E C A | G A S T R O G R I N D E R ALArM sETTINgs TEMPErATurE sETTINgs After grinding a defined number of shots (default Temperature off 1000 shots) the display will show the warning message to clean the grinder.
  • Page 14: Operating Faults

    H O R E C A | G A S T R O G R I N D E R 7. OPeRaTInG faUlTS Defect Cause Remedy The grinder does The main plug is Insert the main plug into Defect Cause Remedy not start, the dis- not inserted.
  • Page 15: Cleaning

    H O R E C A | G A S T R O G R I N D E R 8. CleanInG formation of dust while grinding GRInDZ is natural and harmless. The dust particles can be You should clean your espresso grinder regularly, just like your es- cleaned with a soft cloth from the aroma fez and presso machine.
  • Page 16: Cleaning The Grinder Casing

    H O R E C A | G A S T R O G R I N D E R 9. SeRvICe always pull out the main plug from the socket before carrying out maintenance or cleaning work on the grinder! Do not let any foreign objects fall into the grind- ing mechanism! Inspect the grinder regularly for damage, par-...
  • Page 17: Certificate

    Product: Device for food processing Machine Model: Coffee grinder 3. The grinder may only be opened for cleaning purposes in ac- Type of machine: PEAK cordance with the Operating Instructions. Following directives and regulations have been applied: • The provisions of the Machinery Directive 2006/42/EG 4. This warranty does not cover damages which have occurred •...
  • Page 18 H O R E C A | G A S T R O G R I N D E R nOTeS:...
  • Page 19 H O R E C A | G A S T R O G R I N D E R nOTeS:...
  • Page 20 H O R E C A | G A S T R O G R I N D E R nOTeS:...
  • Page 21 H O R E C A | G A S T R O G R I N D E R mahlKÖnIG Gmbh & Co. KG Tilsiter Straße 142 22047 Hamburg, Germany Phone: +49 40 - 69 69 40-0 Fax: +49 40 - 69 39 721 office@mahlkoenig.de ;...

Table of Contents