Energy Management; At The End Of The Programme - Miele HG05 Operating Instructions Manual

Operation

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes af‐
ter the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme op‐
tions, Optimise standby").
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
44

At the end of the programme

A buzzer will sound at the end of the
programme with the door closed.
 Open the door.
. will appear in the display.
If the programme indicator light is
still flashing the programme is not
yet finished.
Close the door again so that the pro‐
gramme can continue until it has fin‐
ished.
The drying fan may continue to run for
a few minutes at the end of the pro‐
gramme.
 You can now empty the dishwasher.

To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is advisable
to leave the door closed until you are
ready to unload the crockery. Alter‐
natively you can open the door fully
until the crockery is cool enough to
unload. Do not leave the door only
partially open.