Water Inlet Fault - Miele HG05 Operating Instructions Manual

Water inlet fault

Problem
The dishwasher stop‐
ped working shortly af‐
ter the programme star‐
ted.
The buzzer is sounding.
The / indicator
light is flashing on and
off.
The dishwasher has
stopped during a pro‐
gramme.
The buzzer is sounding.
Fault code  or  has
appeared in the display.
Cause and remedy
The stopcock is closed.
 Open the stopcock fully.
Before rectifying the problem:
 Switch the dishwasher off with the  button.
The water intake is restricted.
 Open the stopcock fully and start the programme
again.
 Clean the water inlet filter (see "Maintenance").
 The water pressure at the intake is lower than
50 kPa (0.5 bar).
Seek professional advice.
Problem solving guide
67