Mitsubishi Floppy Disk Drive - Zenith Z-100 Reference Manual

Introduction
This chapter contains hardware and software programming information for the
floppy disk drives, Winchester drives, and the drive controller cards.
Refer also to the section on the Central Processing Unit for the correct DIP switch
settings for the desired system configuration, including: the selection of the auto-
boot, drives present, and number of drives option.
Use the appropriate portions of this chapter for whichever drive type you have
installed: Shugart or Mitsubishi floppy disk drives and/or the Seagate, Computer
Memories (CMI) or MiniScribe Winchester hard disk drive.
Chapter 9
Disk Drives