Intended Use; Technical Description - Waeco CoolAir CA850S Operating Manual

Intended use

3 Intended use
The stationary air conditioner is used to supply the interior of the
driver's cab with cool and dehumidified air.
The system is designed for stationary use. It can be used while
driving.
The stationary air conditioner is not suitable for use in agricultural
or construction vehicles.
Note
I
Only install the stationary air conditioner using the manufacturer's
assembly kit.
4

Technical description

The stationary air conditioner can be used for variable air conditioning inside
the vehicle. The air in the interior is guided into the system through the intake
grille, cooled, dried and conveyed back into the interior through the blower
nozzles. The system is operated using the control panel or the remote con-
trol.
Note
I
The stationary air conditioner can lower the temperature within the
vehicle to a certain level. The temperature depends on the type of
vehicle, the ambient temperature and the cooling capacity of your
stationary air conditioner. For the cooling capacity of your station-
ary air conditioner, see Chapter "Technical data" on page 36.
The system is fitted with a battery monitor. If the system is operated when
the vehicle ignition is switched off, the stationary air conditioner switches off
automatically as soon as the supply voltage falls below a set level.
24
CoolAir