IDEAL HE15 Installation And Servicing page 24

29 FITTING THE OPTIONAL ROOF FLUE KIT (Flat or Pitched)
Note.
A flat or pitched roof flashing plate (not supplied) is
required before proceeding with the installation of
this kit.
This kit is suitable for both flat and pitched roof
terminations, using a concentric flue to run vertically
from the top of the boiler and terminating above roof
level.
Connection to the top of the boiler is made using a
separately supplied vertical connector
WEATHER PROOFING
Where the flue passes through the roof line an
adequate seal must be made. This is achieved by
using either:
Flat roof weather collar or Universal weather collar.
ACCESSORIES
Flue Duct Extension Kits are available for flue
lengths extending beyond 1m. These packs contain
1m extension ducts and may be cut to the desired
length.
If the offset vertical option is used an elbow Kit is
required. For a full accessories list refer to page 7,
Optional Extras.
30 ROOF FLUE KIT CONTENTS / OPTIONS
NOTE. ITEMS D, E, F, G AND H ARE NOT SUPPLIED WITH
THE ROOF FLUE KIT.
A. Flue assembly with terminal
B. Flue seal collar
C. 3.5x13 screw
D. Pitched roof tile/flat roof tile
weather collar
E. Vertical connector (60/100)
comes with gasket and fixing
screws
F . Roof flue extension duct kit
(60/100)
G . 90 o elbow kit (60/100)
H. 45 o elbow kit (60/100)
24
INSTALLATION
G
H
A
C
B
F
E
D
mxhe7778
mexico HE -
Installation & Servicing
mxhe7652