Table of Contents
Advertisement
Required Test Equipment
Agilent 8159xB Optical Switch Modules, Fourth Edition
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Legend:
1,2,3
necessary quantity
-
not applicable
o
optional
APC
angled physical contact
SPC
straight physical connector
FC/xPC-R
FC/xPC connector with R-type narrow keying
FC/xPC
FC/xPC connector
Test Record
Results of the performance test may be tabulated on the Test Record
provided at the end of the test procedures. It is recommended that you fill
out the Test Record and refer to it while executing the test. Since the test
limits and setup information are printed on the Test Record for easy
reference, the record can also be used as an abbreviated test procedure (if
you are already familiar with the test procedure). The test Record can also
be used as a permanent record and may be reproduced without written
permission from Agilent Technologies.
Test Failure
If the Agilent 8159xB Modular Optical Switch fails any performance test,
return the instrument to the nearest Agilent Technologies Sales/Service
Office for repair.
Instrument Specification
Specifications are the performance characteristics of the instrument that
is certified. These specifications, listed in "Optical Switch Module
Specifications" on page 21 are the performance standards or limits against
which the Agilent 8159xB can be tested.
Any changes in the specification due to manufacturing changes, design, or
traceability to the National Institute of Standards and Technology (NIST),
will be covered in a manual change supplement, or revised manual. Such
specifications supersede any that were previously published.
Performance Tests
25
Advertisement
Table of Contents
