Which Cleaning Procedure Should I Use - Agilent Technologies 81591B User Manual

Cleaning Instructions Cleaning Information

Which Cleaning Procedure should I use ?

Light dirt If you just want to clean away light dirt, observe the following procedure
for all devices:
• Use compressed air to blow away large particles.
• Clean the device with a dry cotton swab.
• Use compressed air to blow away any remaining filament left by the
swab.
Heavy dirt If the above procedure is not enough to clean your instrument, follow one
of the procedures below. Please consult "Cleaning Instructions for this
Module" on page 36 for the procedure relevant for this instrument.
If you are unsure of how sensitive your device is to cleaning, please
contact the manufacturer or your sales distributor
43
Agilent 8159xB Optical Switch Modules, Fourth Edition
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com