Adjust the brightness of the display. The brightness level of the
display will affect how quickly the device consumes battery
Set the length of time the device waits before turning off the
display' s backlight:
• Auto: adjusts the brightness of the display automatically and
turns off the display' s backlight after 8 seconds.
• 8 sec (default)
• 20 sec
Select a display mode: Advanced (default), Classic. Start-
up screen, p. 9.
Enable/disable the LED light.
Set the language for the device' s user interface: English,
Deutsch, FranÇais, Español, Italiano. Set the language,
Enable/disable key and signal tones.
Allows you to listen to the recording while forwarding or
rewinding. Quick search, p. 16.
Set the length of time before the recorder will enter into power-
save mode: 1 min, 5 min (default), 10 min, 15 min, Off.
Power-save mode, p. 13.
Date & time
The date and time entered are saved with each recording as the
recording time. Set the date and time, p. 13
You can customize the functionality of the slide switch. By default,
the slide switch is set to Philips.
* EOL and REC STANDBY buttons switch functionality.
Move the slide switch briefly to the B REW position to jump
back the configured number of seconds in the recording: Off
(default), 1 sec, 2 sec, 3 sec, 4 sec.