Table of Contents
Advertisement
the BPU-4000 to the HD SDI-1 to HD-SDI-4 connectors
of port B of the unit.
For output ports
Format
SDI
4K
422
23p/Psf to
1.5G
29p/Psf
3G
50p/59p
3G
HD
422
50i/59i
1.5G
23p/Psf to
1.5G
29p/Psf
50p/59p
1.5G
3G
Out: Represents all SDI IN/OUT 1 to 8 connector outputs.
For single system signal formats transferred using
more than one SDI cable, it is represented by Out1-1,
Out1-2, and so on. 8-system output is supported for
formats that are transferred using one SDI cable
(Single Link), 4-system output for formats using two
cables (Dual Link), and 2-system output for formats
using four cables (Quad Link).
DC: Down-converted 4K to HD signal output for monitor.
Char: Superimposed character information output for
monitor.
–: Not used.
HD SDI IN/OUT connector
a)
a)
a)
a)
1
2
3
4
Out1-1 Out1-2 Out1-3 Out1-4 Out1-1 Out1-2 Out1-3 Out1-4 DC/Char DC/Char
Out1-1 Out1-2 Out1-1 Out1-2 Out1-1 Out1-2 Out1-1 Out1-2 DC/Char DC/Char
Out1-1 Out1-2 Out1-3 Out1-4 Out1-1 Out1-2 Out1-3 Out1-4 DC/Char DC/Char
Out
Out
Out
Out
Out
Out
Out
Out
Out1-1 Out1-2 Out1-1 Out1-2 Out1-1 Out1-2 Out1-1 Out1-2 Char
Out
Out
Out
Out
a) When [Output Port SDI-1,2,3,4] is set to [Off] on the [Setup] tab of the
b) The format of the signals output from the HD SDI IN/OUT 9 and 10
5
6
7
Out
Out
Out
Out
Out
Out
Out
Out
Out
[System] screen in the web menu, no signal is output.
connectors is set when the video format is specified on the [Board] tab of
the [System] screen of the web menu. The supported formats for the HD
SDI IN/OUT 9 and 10 connectors vary depending on the signal format
specified for the HD SDI IN/OUT 1 to 8 connectors.
HD SDI Connector Input/Output Specifications
8
b)
b)
9
10
Out
Char
Char
Out
Char
Char
Char
Out
Char
Char
37
Advertisement
Table of Contents
