Table of Contents
Advertisement
System Parameter
Reference Source
Selects the reference signal for operation of the unit.
• External HD: Tri-level SYNC signal input on the REF.
INPUT connector
• External SD: SD signal input on the REF. INPUT
connector
• Input Board A-1, Input Board A-2 to Input Board D-1,
Input Board D-2: Signal input to the HD SDI INPUT
signal on the corresponding board
Preroll Time
Sets the preroll time in units of seconds.
• 0 to 5 to 30 seconds
Rec Inhibit
Sets record inhibit mode.
• Off: Enables recording
• On: Disables recording
Frame PB Mode
Selects the playback mode during variable speed playback.
• Field: Field playback
• Frame: Frame playback
Freeze PB Mode
Specifies the freeze mode and freeze timing for manual
freeze (freeze control using the front panel, REMOTE 1 to
4 (9-pin) connectors, and GPIO (25-pin) connector) and
auto freeze.
• Field 1: Freezes the 1st (odd) field.
• Field 2: Freezes the 2nd (even) field.
• Frame: Freezes in frame mode.
Record File Naming
Selects the file naming convention for automatically
generated files.
• File + Sequential: Assigns a sequential number.
• Serieal + Time: Uses the recorded time as the file name.
• User Specified Name: Allows the user to specify a 4-
character prefix for the file name.
Importing File Naming
Selects whether to add a "Tmp_" prefix to the file name
during importing.
• Adding [Tmp_]
• Off
File Delete Mode
Selects whether to disable deletion of files while playback
is in progress.
• Inhibition: Prevents deletion of files during playback.
• Permit: Permits the deletion of files during playback. All
playback ports are closed while file deletion is in
progress.
Front LED Mode
Selects whether the front panel indicators are enabled/
disabled.
• Off: Indicators are always off.
• On: Indicators are enabled to indicate the status of the
unit.
QFHD/4K with TC
Selects whether to superimpose the time code on the
output from the HD SDI 1 connector only or on all SDI
signals, if QFHD or 4K is specified as the video format.
• SDI-1 only
• All SDI
Time Shifted Play
Selects, when using chasing playback, whether to play
back video stored in a buffer for playback with the shortest
delay, or to play back video that is recorded in storage.
• Shortest Delay
• From Storage Only
Output Port SDI-1, 2, 3, 4
When using each port as an output port, this selects
whether to output the signal from the HD SDI 1 to 4
connectors. When set to Off, signals are output from the
SDI 5 to 8 connectors only.
• Off
• On
Master TC
Makes master time code settings.
TCG Source
Selects the source signal for synchronizing the internal
time code generator. You can select a signal input on ports
A to D.
• Internal-Preset
• External-LTC: A
• External-LTC: B
• External-LTC: C
• External-LTC: D
REGENE Source
Selects the signal to regenerate when the time code
generator is in regenerate mode or in automatic editing
mode.
• TC&UB: Regenerates both the time code signal and user
bit signal.
• TC Only: Regenerates the time code signal only.
• UB Only: Regenerates the user bit signal only.
DF Mode
Sets the drop frame mode of the time code generator or
timer counter.
• DF
• NDF
Note
This setting is valid only when [TCG Source] is set to
"Internal-Preset" and the frame frequency is 29.97 Hz.
21
System Screen
Advertisement
Table of Contents
