Sony PWS-4400 Operation Manual page 29

Multi-channel recorder multi port av storage unit
Hide thumbs Also See for PWS-4400:
Table of Contents

Advertisement

Meta Data Input
Sets from which lines to acquire uncompressed metadata.
Meta Line 1
• 9H to 16H
• 18H to 20H (up to 25H for 720p)
Meta Line 2
• 9H to 16H
• 18H to 19H to 20H (up to 25H for 720p)
Meta Line 3
• 9H to 16H
• 18H to 20H (up to 25H for 720p)
Video
Port Configuration
Selects the video format of each port from the matrix.
Internal Video SG
Selects the type of signal output from the internal signal
generator.
• Off
• CB100
• CB75
• SMPTE
• ARIB
• MB1
• MB2
• 10STEP
• PBAR
• RAMP
• Black
• White
Audio
Audio Input Select
Selects the external channel to record for each audio file
track. Also selects the type of each signal (SDI or AES/
EBU) to record.
Track Number
Selects the number of audio tracks for recording.
• 8 track
• 16 track
AES/EBU Input Mode
Selects whether to pass the input AES/EBU signal through
a sampling rate converter when recording.
• Auto: Use converter. In this case, there are no limitations
on input signals.
• Vlock: Do not use converter. In this case, the input
signals need to be locked to the video signal at 48 kHz.
Noise will occur if this condition is not met.
SDI Source Port
For dual-system input per board, this selects whether the
audio signal is input on the main port or the sub-port.
• x-1: Selects the main port audio signal.
• x-2: Selects the sub-port audio signal.
"x" represents the port (A to D).
Non-Audio Input Select
Selects whether to input non-audio data.
• Invalid
• SDI-Data
• A/E Data
Internal Audio SG
Selects the type of signal output from the internal signal
generator.
• Off: No output
• Silence: Silence signal
• 1kHz: 1 kHz sine wave
29
Port Screen

Advertisement

Table of Contents
loading

Table of Contents