Table of Contents
Advertisement
TECHNICAL SPECIFICATION
Spec
A. TECHNICAL FEATURE OF THE 2-IN-1 BASE MODULE:
1. Channel: 100 Channels
2. Frequency Range: UHF 520~682 MHz
3. Signal to Noise Ratio: > 90dB
4. Total Harmonic Distortion: < 0.05%
5. Band Width: < 200kHz
6. Frequency Response: 35Hz~20kHz +/-3dB
7 . Dynamic Range: > 100dB
8. Valid Distance: 0.50m
9. Audio Output Level: Unbalanced Out: 0~+/-400mV
10. Power Supply: DC 14V~22V with 500mA~1000mA, AC 120V (For 220V,
you may need to change to a 220V~240V DC adaptor)
11. Consume Power: 5 Watts
12. Receiver Dimensions (WxHxD): 11.8 x 1.9 x 7 .1 (inches) / 30 x 4.8 x 18 (cm)
13. Package Dimensions (WxHxD): 16.9 x 13.8 x 3 (inches) / 43 x 35 x 7 .5 (cm)
14. Shipping Weight: 5.6 lbs / 2.5 kg
B. TECHNICAL FEATURE OF THE MICROPHONE:
1. Transmitter Power: 5mW and 10mW
2. Osillation Mode: PLL
3. Image Controlment: >50dB
4. Adjust Frequency Deviation: <75kHz
5. Channel Switch Mode: Coding Switch
6. Power Supply: DC 2.4V~4.8V
7 . Battery Voltage: 2 x AA 1.5V Alkaline Battery
8. Continuous Using: 8 Hours (GP) 2 x AA 1.5V Battery
9. Microphone Dimensions (WxH): 10.4 x 2.2 (inches) / 26.5 x 5.5 (cm)
C. THIS SYSTEM INCLUDES THE FOLLOW:
• 2-in- 1 Base Module: 1 Set
• Handheld Microphone: 2 Sets
• Antenna: 2 Units
• AA 1.5V Battery: 4 Units
Balanced Out: 0~+/-200mV
14
• DC-Power Adaptor: 1 Unit
• Audio Cable: 1 Unit
• Instructional Manual: 1 Unit
Advertisement
Table of Contents
