Technical Description - Waeco IU152A Installation And Operating Manual

_PerfectCharge_IU152A-IU802A.book Seite 41 Dienstag, 15. September 2009 5:19 17
PerfectCharge
6

Technical description

6.1 Function
A fuse protects the device from damage if the polarity is reversed. For the
type and rating of the fuse in your device, see chapter "Technical data" on
page 55.
Caution
e
The device's fuse may only be replaced by qualified personnel who
are familiar with the risks involved and the relevant regulations.
Note
I
You can use a temperature sensor (accessory) to protect the bat-
tery from damage from extreme outdoor temperatures. The tem-
perature sensor is attached to the battery and connected to the
IU0U automatic charger. It protects the battery by adjusting the
charging voltage to the temperature of the battery (see chapter
"Charging characteristics" on page 51).
Three control lamps on the device are for constant monitoring of the IU0U au-
tomatic charger (see chapter "Functional check" on page 53).
6.2 Specifications for the device variants
Various PerfectCharge IU0U automatic charger versions are available.
Your IU0U automatic charger can be used to charge batteries up to a speci-
fied battery capacity (see chapter "Technical data" on page 55):
IU152A: suitable for charging one supply battery and one starter battery
IU154A, IU252A: suitable for charging up to two supply batteries and one
starter battery
IU254A, IU452A, IU404A, IU802A: suitable for charging up to three
supply batteries.
For the identification of your device, see the item number on the type plate.
Technical description
41