Making/Answering Calls; Making Calls; Answering Calls; Useful Features During A Call - Panasonic KX-PRS120AZ Operating Instructions Manual

Making/Answering Calls

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCN.
2
Press M N.
3
When you finish talking, press M
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press M
Note:
R To switch back to the receiver, press MZN/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
MTN
2
MbN: Select the desired phone number.
3
M N/MZN
R If MZN is pressed and the other party's
line is engaged, the unit automatically
redials multiple times.
Erasing a number in the redial list
1
MTN
2
MbN: Select the desired phone number.
a MEraseN
3
MbN: "Yes" a MOKN a M
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
14
PRS120AZ(en)_0724_ver012.pdf PRS120AZ(en)_0724_ver012.pdf
and/or PIN in the phonebook, a pause is also
needed (page 19).
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
2
N or Note:
R A 3 second pause is inserted each time MDN

Answering calls

N.
1
2
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 25).
Temporary ringer off: You can turn the ringer
off temporarily by pressing M
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Useful features during a
call
Hold
1
2
N
3
Note:
R After holding for 10 minutes, the call is
14 14
0 a MDN (Pause)
Dial the phone number. a M
(Pause) is pressed.
Lift the handset and press M
when the unit rings.
When you finish talking, press M
place the handset on the base unit or
charger.
Press MMenuN during an outside call.
MbN: "Hold" a MOKN
To release hold, press M
disconnected.
2013/07/24 2013/07/24 11:29:08 11:29:08
N
N or MZN
N or
N.
N.