Getting Started; Setting Up - Panasonic KX-PRS120AZ Operating Instructions Manual

Setting up

Connections
n Base unit
Connect the AC adaptor plug to the unit
until you hear a click.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit until you hear a click.
Fasten the cord by hooking it.
Connect the telephone line cord to the
telephone line socket until you hear a
click.
A DSL/ADSL filter (not supplied)
required if you have a DSL/ADSL service.
*1 For Australia: Connect a DSL/ADSL filter
between the telephone plug and
telephone line cord.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226AL.
R Use only the supplied telephone line cord.
4 1
5 2
6 7
3
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (A).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
PRS120AZ(en)_0724_ver012.pdf PRS120AZ(en)_0724_ver012.pdf
R Confirm correct polarities (
*1
is
R Follow the directions on the display to set
Battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (A).
R When the batteries are fully charged,
Note when setting up
Note for connections
R The AC adaptor must remain connected at
R The AC adaptor should be connected to a
9 9

Getting Started

1
up the unit.
"Fully charged" is displayed.
all times. (It is normal for the adaptor to feel
warm during use.)
vertically oriented or floor-mounted AC
2013/07/24 2013/07/24 11:29:08 11:29:08
, ).
1
9