Table of Contents
Advertisement
● Immediately stop using the battery if the battery produces odor, overheats, cracks, distorts or
has other damage, or if the electrolyte leaks.
● The battery wears out with use. A longer charging time is required as the battery is put
into use for a long time. If the total conversation duration decreases but the charging time
increases even though the battery is properly charged, purchase a standard battery from the
OEM or use a battery approved by our company. Using any poor-quality fittings will cause
harm to your mobile phone or even incur danger!
Note: To guarantee your personal safety and protect the environment, do not litter the battery! Return the old battery to the mobile
phone manufacturer or place it in specified battery reclamation areas. Do not litter any battery with other rubbish.
Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences!
4.4 Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A power-on animation appears
on the display screen.
Input the phone lock code and press the OK key if the mobile phone prompts you to input
the phone lock code. The original code is 1122.
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN.
The PIN is provided by the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End key for a while.
4.5 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone automat-
ically searches for an available network. After finding a network, the mobile phone enters the
standby state. When the mobile phone is registered in the network, the name of the network
operator is displayed on the screen. Then you can dial or receive a call.
4.6 Dialing Calls
In the standby interface, press number keys to input the area code and the telephone number,
and then press the Dial key to dial a call. To end the call, press the End key.
● Dialing an international call
Hold the 0 key and input "+". Then input the country code, the area code and the telephone
number. Finally, press the Dial key.
● Dialing a call to a number in the phonebook
Enter the phonebook and use the up or down direction keys to find the telephone number
you want to call. Press the Answer key. The mobile phone automatically dials the chosen
telephone number.
● Redialing
In the standby interface, press the Dial key to show the all calls.
Press the up or down direction keys to select a number you want to dial and then
press the Dial key.
● Answering incoming calls
Press the Dial key or the Left soft key to answer an incoming call.
Press the End key to end the current conversation.
To reject an incoming call, press the End key.
Note: If the calling number exists in the phonebook, the mobile phone will present the name of the caller. If the caller cannot be
identified, the mobile phone will present the calling number only. You can answer an incoming call when using a function list or
browsing the phonebook.
17
Advertisement
Table of Contents
