Caller List - Panasonic KX-PRS120AZ Operating Instructions Manual

Caller ID Service
R Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your service
provider/telephone company.
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed after you hear
the call waiting tone on the handset.
1
Press MR/ECON to answer the 2nd call.
2
To switch between calls, press MR/ECON.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.

Caller list

Important:
R Make sure the unit's date and time setting
is correct (page 12).
Viewing the caller list and calling
back
1
M N
36
PRS120AZ(en)_0724_ver012.pdf PRS120AZ(en)_0724_ver012.pdf
2
3
Note:
R If the entry has already been viewed or
R If you do not want to dial the area code
Editing a caller's phone number
The caller's telephone number, which is sent
to your telephone from your local telephone
exchange, includes "0" and an area code
prefix. For local calls, "0" and the area code
prefix can be omitted. (for New Zealand)
1
2
3
4
5
Erasing selected caller
information
1
2
3
Erasing all caller information
1
2
36 36
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R You can see the detailed information
about the caller by pressing MDetailN
when in multiple display mode.
To call back, press M N.
To exit, press M N.
answered, " " is displayed.
when making calls from the caller list, you
can store the area code which you want the
unit to delete automatically (page 31).
M N
MbN: Select the desired entry. a MDetailN
MMenuN a MbN: "Edit" a MOKN
Edit the number.
M N
M N
MbN: Select the desired entry.
MEraseN a MbN: "Yes" a MOKN a
M N
M N
MEraseN a MbN: "Yes" a MOKN a
M N
2013/07/24 2013/07/24 11:29:10 11:29:10