Programme Selection; Programme Position Management - Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Operating Instructions Manual

This TV set can manage up to 225 TV programme positions. If you are connected to a cable network or use a terrestrial aerial, you will not need all
of these positions at the moment. If, however, you have a SAT upgrade kit installed, the number of programmes can increase drastically. We do not
know how many programmes will be available in the future. For this reason, we have provided plenty of programme positions in reserve. For
selection of the desired programme position, we have invented a simple input method which saves you having to enter three digits for each position.
The first digit you enter is normally the hundreds digit. If, however, you have less than 100 programmes stored, this digit auto-
matically moves to the tens position. If you have less than ten programmes stored, it moves to the units position.
Example: you have stored programmes in positions 1 to 35 and you want to select position 3. Press the keys
confirm with . Programme position 4 can be selected by simply entering
OK
Further examples are shown in the following text.
Press this key on the remote
control....
1. Select programme position
2 (only the first 9 programme
positions in the station table
are occupied)
2
2. Select programme position
25 (only the first 99 pro-
gramme positions in the
station table are occupied)
2 5
3. Select programme position
101 (more than 100 pro-
gramme positions in the
station table are occupied)
1 0 1
4. Next programme
P
+
P
-
6

2. Programme selection

The screen displays
Pr 2 MONO
ZDF
18:15:33
Pr 25 MONO
S-RTL
18:15:48
Pr 101 MONO
Nord3
18:15:48
Pr 3 MONO
Bayern 3
18:15:48
, since there are no programme positions higher than 39.
Only the programme positions 0-9 in the station table
may be occupied if a programme is to be selected by
pressing one numeric key.
Pressing the numeric key opens a time-delay win-
dow* which waits for 3 seconds for the input of
further digits. If no further numeric key is pressed,
the TV set switches to the programme position
selected with the first digit.
* The operating mode of this time delay window can
be changed: see page 20, item 5, „PC time out".
Only the programme positions 0-99 in the station table
may be occupied if a programme is to be selected by
pressing two numeric keys.
After a programme has been selected successfully, a box
containing the programme position number, the time and the
current sound mode (e.g. stereo) is displayed on the screen.
To select a programme position with only a single-digit
number, you must enter
e.g. and ; alternatively, you can press
then press .
OK
In this case, more than 100 programme positions in
the station table are occupied, which means that you
have to press three numeric keys.
After a programme has been selected successfully, a box
containing the programme position number, the time and the
current sound mode (e.g. stereo) is displayed on the screen.
To select a programme positions with a single-digit or
two-digit number, you must enter
related digit(s), e.g.
can press and then press
You can step sequentially through the programme
positions with the
ZDF
is held down for more than two seconds, a programme
BR3
RTL
box for selection of the desired programme is displayed
SAT1
RTL2 on the screen. Release the
PRO7
the desired logo is highlighted in white: this programme
EUSPO
NTV
position will then be selected.
NORD3
MDR3
SWF3
Programme position
management
and or simply
Explanation
before the related digit,
before the
and ; alternatively, you
.
OK
keys. If either of these keys
P
P
-
+
or key as soon as
P
P -
+
and
and