Direct Channel Entry/Station Search - Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Operating Instructions Manual

When the TV set leaves the factory, there are no stations programmed. Depending on where you live, the stations have different channel
numbers. There are three possible ways of programming the stations:
a) Direct channel input
Press this key on the remote
control....
1. Call the station table and
channel type survey
white
yellow
2. Select the type of channel
(e.g. standard channel)
blue
3. Enter the channel number
(Example: Standard channel
06) or start station search
0 6
or
-
4. Store the setting and return
to TV picture
OK TV
10
3. Presetting TV stations
b) Station search
The screen displays
return picture
TV
MENU
TV station table
Prog Logo Chan./Freq.
LM
0 LOGIC 00
1 ARD 06
2 ZDF 34
3 SAT 1 40
4
Std channel 06
5
Spec. channel
6
Fine tuning
7
8
SAT-Frequ.
9
Aerial control
>> weitere Einstellungen
Std, Pict., Sound
6 9 6 + 0 3 A - G B
return picture
TV
MENU
TV station table
Prog Logo Chan./Freq.
LM
0 LOGIC 00
1 ARD 06
2 ZDF 34
3 SAT 1 40
4
Std channel 06
5
Spec. channel
6
Fine tuning
7
8
SAT-Frequ.
9
Aerial control
>> weitere Einstellungen
Std, Pict., Sound
6 9 6 + 0 3 A - G B
return picture
TV
MENU
TV station table
Prog Logo Chan./Freq.
LM
0 LOGIC 00
1 ARD 06
2 ZDF 34
3 SAT 1 40
4
Std channel 06
5
Spec. channel
6
Fine tuning
7
8
SAT-Frequ.
9
Aerial control
>> weitere Einstellungen
Std, Pict., Sound
6 9 6 + 0 3 A - S - G B
TV picture
c) the Autostore function
With direct channel entry it is necessary to know the
Help
?
type of channel and the channel number.
If type and number of channel are not known, you can
scan through the entire reception range with the
Signal
search function to locate stations.
Video Rec.1
Aerial
The station table lists all the preset stations.
Aerial
Aerial
These stations can be changed at any time.
ARD
The cursor always highlights the type of channel
currently preset in the given programme position.
For the search function it is advisable to switch to a
vacant programme position.
Two types of channels are offered in the box with the
Help
?
yellow frame. Select the desired channel type with the
related coloured keys.
Signal Once the channel type has been selected, a channel
number is displayed for the highlighted item if a station
Video Rec.1
Aerial
is stored in this programme position. If no station is
Aerial
stored, two dashes are displayed.
Aerial
ARD
„SAT freq." and „Aerial control" can be selected only if
a SAT upgrade kit is installed in the TV set.
Help
?
With direct channel entry, the station table is briefly
faded out when the channel number is entered, and
the selected station is displayed.
Signal
The station search proceeds from the displayed
Video Rec.1
channel number in a forward sequence with the
Aerial
Aerial key, and in a reverse sequence with the
Aerial
Search proceeds from the lower channel area
ARD
upwards or downwards when two lines are displayed.
The search stops when a station has been found.
Proceed as described in step 4 if the located station is
to be stored.
store ?
OK
Press the
stored so that the search can be continued.
Complete fine tuning if station reception is not clear
(see Section 3.2).
Direct channel entry/
station search
Explanation
-
or key if the located station is not to be
-
key.