Subscribe to Our Youtube Channel
Related Manuals for Metz 63 TG51, 63 TG 62, 70 TG 65, 70 TG 53, 72 TG MT
Summary of Contents for Metz 63 TG51, 63 TG 62, 70 TG 65, 70 TG 53, 72 TG MT
- Page 1 TV. VIDEO. AUDIO. MECABLITZ Tiros 63 TG 51 - 100 MT Ibiza-SF 63 TG 62 - 100 MT Morea-S 70 TG 65 - 100 MT Crystal 70 TG 53 - 100 MT Linea de luxe – SF 72 TG 67 - 100 MT Operating instructions...
-
Page 2: Table Of Contents
AV recording .......22 Camcorder ‹ video recorder .....22 Video recorder ‹... -
Page 3: Remote Control Handset Rb11
Remote control handset RB 11 The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use infrared light (such as infrared headphones). -
Page 4: Setting Up And Connecting
1. Setting up and connecting Setting up When selecting a suitable place for the TV, be sure that no bright light or sunlight falls on the screen. Light may cause reflections and impair the brilliance of the image. The best viewing distance is five times the picture tube diagonal, e.g. -
Page 5: Turning The Tv On And Off
1.1 Turning the TV on and off Turning on with the ON/OFF key Before turning on a cold TV in a warm room, first allow any condensation mist that may have formed on the screen to evaporate. Press the ON/OFF key. Programme position 1 is then selected. -
Page 6: Programme Selection
This TV set can manage up to 225 TV programme positions. If you are connected to a cable network or use a terrestrial aerial, you will not need all of these positions at the moment. If, however, you have a SAT upgrade kit installed, the number of programmes can increase drastically. We do not know how many programmes will be available in the future. -
Page 7: Back To Last Programme
Press this key on the remote control... Last programme PRG. 2.1 TV menu and operator help Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and clearly comprehensible for everyone. Operator Help can be called with the individual keys. -
Page 8: Presetting Tv Stations
3. Presetting TV stations In the sub-menu Standard, you can select the colour and/or the transmission standard. The TV set normally recognises the colour stan- dards (PAL, SECAM, NTSC) automatically, but the transmission standard must always be set manually. The multi-standard upgrade kit is required for the additional transmission standards L, I, D/K and NTSC 4.43. -
Page 9: Direct Channel Entry/Station Search
3. Presetting TV stations When the TV set leaves the factory, there are no stations programmed. Depending on where you live, the stations have different channel numbers. There are three possible ways of programming the stations: a) Direct channel input Press this key on the remote control... -
Page 10: Autostore Function
3. Presetting TV stations The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in the station table and can then be stored by way of the If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as described on the next page. -
Page 11: Sorting Stations
In the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is displayed automatically after the autostore function has found all available stations. This menu can also be called at any time from the station table display for subsequent modification of the station programming. Press this key on the remote control... -
Page 12: Fine Tuning
The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient. Apply manual fine tuning if automatic tuning does not produce satisfactory results. Select the programme number at which fine tuning is to be completed. Press this key on the remote control... -
Page 13: Allocating A Station Logo
3.3 Allocating a station logo A logo of up to 8 characters is provided for each station via the VPS signal. The station RTL 2, for example, receives the logo RTL 2. Manual logo allocation is not necessary with most stations. The corresponding station logo appears a few seconds after the picture when a station is selected by direct channel entry. -
Page 14: Changing Individual Picture Settings
4. Changing individual picture settings Press this key on the remote control... 1. Adjusting the luminance blue 2. Adjusting the contrast blue 4.1 Changing individual sound settings Press this key on the remote control... 1. Adjusting the volume yellow 2. Adjusting the treble setting yellow 3. -
Page 15: Adjusting The Video And Audio Standard Values
4.2 Adjusting the video and audio standard values Press this key on the remote control... MENU 1. Call the TV menu MENU 2. Example 1: Call the „Video MENU standard values“ sub- menu. Adjust and store the sharpness. blue 3. Example 2: Call the „Audio MENU standard values“... -
Page 16: Equipment Configuration
5. Equipment configuration The remote control handset has three factory programmed function keys A, B and C. Press the the factory programming. The displayed Operator Help text describes the current programming in the last-but-one paragraph. This pro- gramming can be changed according to your requirements in conformity with the displayed selection. This choice is described in the „Glossary“... -
Page 17: Assigning The Function Keys
5. Equipment configuration Press this key on the remote control... 4. Select the function for TV MENU mode (in this example „Subtitles“) MENU 5. Switch to Hi Text mode and program the function keys 6. Store the assignments and MENU return to the „Equipment Configuration“... -
Page 18: Settings For Programme Change
5. Equipment configuration Press this key on the remote control... MENU 1. Call the „Equipment configuration“ menu MENU MENU 2. Call the settings for programme change blue MENU 3. Set spatial sound when changing programmes yellow white MENU 4. Set the PC „time out“ green 5. -
Page 19: Volume Adjustment And Forced Mono
6. Volume adjustment and forced mono It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme positions are identical. To overcome this problem, you can set a volume correction factor for each programme position. Example: Programme 1 is soft: volume value 40. -
Page 20: Correcting Picture Deviations
6.1 Correcting picture deviations It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme position and/or to select a picture correction function (CTI, noise reduction). - Page 21 6.1 Correcting picture deviations Press this key on the remote control... 5. Adjust the colour offset or contrast yellow white 6. Change the picture format green 7. Store all settings and return to TV picture The screen displays return picture Help MENU TV station table...
-
Page 22: Av Recording
AV device is a generic term for all external video units, such as video recorders, camcorders,video disk players, photo CD players, etc which can be connected to a TV. Example: You wish to copy a film recorded with an S-VHS/Hi8 camcorder to an LogicVTR video recorder which is also connected to the TV set. -
Page 23: Video Recorder ‹ Video Recorder
L o g i c V T R L o g i c V T R yellow P r : R T L 2 EURO2: Camcorder ➜ LogicVTR Logic VTR ➜ Videorec.2 Video record ? 6 0 0 + 0 7 D - G B... -
Page 24: Time Settings
In the „Time settings“ menu, you can enter settings which will instruct the TV to switch itself on or off, and to display a reminder at a given time. Switching from summer time to winter time and vice versa is carried out automatically by the teletext clock or when the set is switched from standby mode to programme position 1. -
Page 25: Switch-On/Off And Reminder Time
Press this key on the remote control... 4. Enter the reminder time (Example: 21.45 hr) white 5. Enter the time manually (Example: 14.24 hr) green 6. Switch to standby mode 8. Time settings The screen displays return picture Help MENU Time settings Switch-on time: 20:00... -
Page 26: Childlock
Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to children’s programmess on selected channels. - Page 27 Press this key on the remote control... 4. Enter your personal code white 5. Enter the beginning and end of the viewing period green 6. Activate the childlock Call the TV menu and enter your personal code 8.1 Childlock The screen displays return picture Help...
-
Page 28: Recording With The Timer
8.2 Recording with the timer The menu "Timer recording" is intended primarily for recording Pay-TV programmes (e.g. Premiere). When using a Metz video recorder with „Data Logic“ you can also record SAT programmes* with this menu. For this purpose, the video recorder must be connected to the EURO 2 socket. -
Page 29: Connecting Headphones
9. Connecting headphones Headphones can be connected to the TV by way of the connecting socket underneath the fascia cover at the front. The socket will only accept headphones with a 3.5 mm jack plug. We recommend the use of headphones with an impedance of at least 32 Ohms. Headphones of a lower impedance (down to approx.8 Ohms) will impair the sound quality. -
Page 30: Hi Text
Hi Text permits broadcasting stations to improve the display of information and graphics. In the past, there were only eight colours available; with Hi Text, there are 4096 possibilities. Furthermore, the introduction of so-called pixel graphics makes it possible to present the information pictorially. The broadcasting stations are currently in the process of adopting these innovations. - Page 31 Press this key on the remote control... 5. Page-by-page paging white 6 9 6 + 1 0 E - D 6. Chapter-by-chapter paging yellow 6 9 6 + 1 0 F - D 7. Subject-by-subject paging blue 6 9 6 + 1 0 G - D 10.
-
Page 32: Multiple Pages
Press this key on the remote control... 1. Recognizing multiple pages 6 9 6 + 1 0 H - D 2. Selecting subpages 696 +10I-D 6 9 6 + 1 0 D - D 10. Hi Text The screen displays 02 03 04 05 Marke: nächste... -
Page 33: Page Selection By Cursor
Press this key on the remote control... 1. Enter the page number e.g. page 589 6 9 6 + 1 0 H - D Return to last index page 6 9 6 + 1 0 D -D Suppressing news-flash pages white 696+12A-D 10. -
Page 34: Doubling The Font Size
Press this key on the remote control... 1. Select double font size, e.g. press the B* key 6 9 6 + 1 0 E - D 2. Scroll the page upwards, e.g. press the B* key 3. Scroll the page further, e.g. -
Page 35: Setting Marks
There will be certain Hi Text pages, e.g. stock market, news, weather forecast, etc., that you willl want to read repeatedly. We have pro- grammed a way of making it easier to read such pages: Hi Text pages can be flagged with the aid of marks (similar to tabs in a file). We provide a total of 100 marks. - Page 36 Press this key on the remote control... 4. Set the second mark MARKE 2 589 ARD/ZDF 6 9 6 + 1 0 K - D 5. Set further marks MARKE 3 500 ARD/ZDF So. 5.01.97 13:47:00 e.g. page 500 6 9 6 + 1 0 M - D 6.
-
Page 37: Infotext
The basic idea of Infotext is that you can quickly retrieve and read pages which have previously been marked as described on the two pre- vious pages of this manual. Once marks have been set, you can page through the related pages at any time by pressing a programmed function key Once the marks have been set, you can step through all of the marked pages from the current TV programme by pressing a programmed key (key C is programmed in the factory for this purpose). -
Page 38: Erasing Marks
Press this key on the remote control... 1. Call the desired page MARKE 1 400 ARD/ZDF So. 5.01.97 14:19:00 e.g. page 400 696+10J-D 2. Erase the mark 696+10G-D 3. Return to TV picture 10. Hi Text The screen displays Kartei Marke: entf. -
Page 39: Subtitles
This TV enables you to display programme subtitles automatically. For this purpose one of the three A, B or C function keys must be programmed on the remote control handset. Please refer to Section „Equipment configuration - Assigning the function keys“ for programming. The subtitles will only be displayed automatically after a function key has been programmed accordingly. -
Page 40: Special Picture Effects
11. Special picture effects All programmes that are not transmitted in the traditional 4:3 screen format, such as cinema films in Cinemascope or Super-Cinemascope or 16:9 format, have black bars at the top and bottom of the screen. With the zoom function, you can increase the size of the picture and make the black bars disappear. Although this also causes part of the picture to move off the screen at each side, the resulting loss of information is slight and less disturbing than the black bars. -
Page 41: Still Picture
11. Special picture effects Press this key on the remote control... 1. Activate the still picture function 2. Deactivate the still picture function 12. Operation without remote control This mode is only intended for an emergency when the battery in the remote control handset is flat, or if the remote control is not available. -
Page 42: Remote Control Handset For Video Recorders
13. Remote control handset for video recorders Some of the basic functions of Metz video recorders can be controlled with the remote control unit. Point the remote control handset towards the video recorder when using it. In order to permit control of a video recorder, function key B for the TV level must be programmed to „VTR operation“ in the menu „Equipment configuration/Assigning the function keys“... -
Page 43: Connecting Peripheral Equipment
TV set with special cables (available from your dealer). The following connection diagram applies in principle to all of our products, although the various sockets may be located in different positions on different units. Camcorder (video camera) TV set, rear view Cinch-Scart cable for VHS-Scart or S-VHS-Scart connection e.g. -
Page 44: Connecting External Devices
TV set(e.g. DataLogic, QLink, EasyLink, Megalogic) VTR+Dec. = video recorder and Pay-TV decoder (e.g. Premiere), where the decoder is connected only to the video recorder. Camcorder = video camera Decoder = Pay-TV decoder (e-g- Premiere) SAT = external satellite receiver Game = games console... -
Page 45: Connecting Video Recorders
14. Connecting peripheral equipment Connecting a video recorder via the aerial socket • Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable. • Load a recorded video cassette in the video recorder. •... -
Page 46: Video Recorders Video Signal
14. Connecting peripheral equipment In the following example, logic video recorder 1 is to be connected to the EURO 1 socket. Example: Connect video recorder 1 to the EURO 1 socket. Press this key on the remote control... 1. Select any desired program- me position and call the station table white... -
Page 47: Connecting A Pay-Tv Decoder (E.g. Premiere)
14. Connecting peripheral equipment Pay-TV decoder This Pay-TV decoder decodes the scrambled signals of a Pay-TV station (e.g. Premiere) so that they can be displayed on the screen of the TV set. For connection of a Pay-TV decoder, you need a EURO (=Scart) cable in which all 21 pins are assigned. If you want to record Pay-TV programmes with a video recorder, we recommend that you connect the Pay-TV decoder directly to the video recorder. -
Page 48: Video Signal For Pay-Tv Decoder
14. Connecting peripheral equipment For the following explanation it is assumed that the Pay-TV decoder A (Premiere) is connected to the EURO 1 socket. The following settings must be made on the TV set: Press this key on the remote control... -
Page 49: Technical Data
15. Technical data Mains voltage: 230 V AC 50/60 Hz Power consumption: Music power output to DIN 45324 Power consumption (to CENELEC/TC 59 X): Linea 115 W env. Morea Crystal 110 W env. Tiros Ibiza Power consumption/h Linea 115 Wh Morea 110 Wh Crystal... -
Page 50: Glossary
Audio Latin for „I hear“ - The sound frequency range audible to the human ear is between 60 to 20,000 Hz approx. Camcorder A video camera with integrated video recorder. Cinch (phono) Single-pole plug connector for separate audio and/or video copying. -
Page 51: Data Logic
• Automatic power-off of the video recorder if the TV set is swit- ched to standby mode. (Not available on VC Series) Video recorders of the Metz VC series, in combination with a Metz TV set with SAT facility, offer you the tremendous advantage of problemfree recording of SAT programmes. -
Page 52: Index
ccess to riddle solution (Hi Text)....39 Aerial connection ....... . . 4 Allocating a station logo . -
Page 53: Troubleshooting And Care Of The Set
Troubleshooting and care of the set Repairs The TV should only be opened and repaired by qualified service personnel! CAUTION! DANGER! Consult your dealer when repairs are necessary. If there is a technical fault in your TV set, the complete lamp assembly must be replaced by a trained technician! The TV set may be opened and repaired only by a trained techni- cian. - Page 54 Quality – A matter of principle. With the trend-setting Metz technology you will allways make the correct choice. See your Metz dealer. He will be happy to demonstrate the current Metz range. Metz. Always first class. Metz-Werke GmbH & Co KG Postfach 1267, D-90506 Zirndorf Internet: www.metz.de...
Need help?
Do you have a question about the 63 TG51, 63 TG 62, 70 TG 65, 70 TG 53, 72 TG MT and is the answer not in the manual?
Questions and answers