Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Metz 70TL67
Summary of Contents for Metz 70TL67
-
Page 1: Operating Instructions
Spectral-55 Astral-63 Nordkap-70 Spectral-70 Linea-72 Linea-70 Astral-72 Kreta-72 Spectral-82 Astral-82 Operating instructions 55TK68 63TK63 70T L 73 70TH90 72TK67 7 0 T L 6 7 72TK79 72TK87 82TK91 82TH95 603 47 2013.A3... -
Page 2: Table Of Contents
Foreword Dear customer, thank you for purchasing this Metz product. We have equipped this TV set with a menu system which uses "file cards" and believe that this will provide you with a user interface that is easy to under- stand. -
Page 3: Installation
1. Installation • Take care that no bright artificial light or sunshi- ne falls directly on the screen. This could cause reflections which have a negative effect on the brilliance of the picture. • The optimum viewing distance is about five times the screen diagonal dimen- sion. -
Page 4: Safety Notes
2. Safety notes • Always place the monitor on a solid, stable sur- face. • If a cold TV set is moved to a warm room, always allow any condensation on the screen to evaporate before switching it on. • The TV set is intended for use in a dry room. If, in exceptional circumstances, you use it out- doors, take care that is protected against moi- sture (rain, splashed water, dew). - Page 5 2. Safety notes • Lightning can damage electrical equipment. A lightning flash entering the power cable or the aerial cable can damage the TV set even if it is switched off. You should therefore disconnect the power cable and aerial cable from their out- lets or from the TV set in the case of a thunder- storm.
-
Page 6: Remote Control Unit
3. Remote control unit The remote control unit transmits com- mands to the TV set with the aid of infrared light. You should always point the remote control unit directly at the TV set. The remote control unit may possi- bly interfere with other infrared devices (such as infrared headphones) within its range. -
Page 7: Overview Of Key Functions
3. Remote control unit Overview of key functions Switch to satellite radio mode Switch on from standby mode to satellite radio mode only if a SAT upgrade module is fitted) Function keys F1 ... F3 Cursor control key in the „Information“ and the TV menu OK - confirmation key Change settings in the TV menu Sound mute... -
Page 8: General Operating Notes
Call the menu INFO Information Contents (1/2) Index Programme selection Pictures settings Sound settings AV playback / recording / satellite recording Teletext Function keys Satellite radio mode Use the cursor to select an underlined text. OK: further information INFO: help index Previously visited pages: backwards 4. - Page 9 4. General operating notes Using the menus With the „TV menu“, we help you to find your way through the many operating functions of your TV set. Do not hesitate to try out the options in the various menus. Any changes you make become permanently effective only if you save them by pressing the „OK“...
-
Page 10: Daily Operation
5. Daily operation Switching on Switch on the TV set with the main switch. The red standby indicator lights. Then enter the desired programme position on the numeric keys of the remote control unit. Alternatively, simply press the key with the TV set in standby mode to select the programme position you were watching before the set was switched off. -
Page 11: Setting The Operating Mode
If you wish to reduce the operating scope of your TV set, please consult your local Metz dealer. The operating scope of the TV set is indicated by asterisks in the menus and can be reduced in two stages in order to prevent inadvertent changing of certain settings. -
Page 12: Operating Scope
5.2 Operating scope The full TV menu is displayed A reduced TV menu is displayed. The follo- wing functions are no longer available: - Special picture settings such as panorama, CTI, noise reduction, picture sharpness, etc. - Special sound settings such as stereo wide, spati- al sound, balance, tone settings, etc. -
Page 13: Setting Language And Country
6. Setting the language and country In a menu with two asterisks (**), the set- tings for the menu items "Language" and "Country" cannot be changed. Setting the language for the TV menu You can select one of the available languages for the display of the TV menu. -
Page 14: Programming Stations
Call the menu MENU Operation Picture-Volume Function for F3* AV devices Function for F1* Station table EURO sockets* Station search Timer Country* Configuration Language* : select menu item TV standard B/G 2) Available only on TV sets which are equipped with this option. - Page 15 7. Programming stations b) Station search The station search function permits you to search for specific stations if you do not know their chan- nel number or frequency. Executing a station search • Press the „MENU“ key to display the TV menu. •...
-
Page 16: Fine Tuning
Call the menu MENU Picture-Volume AV devices Station table Station table Timer Configuration Change value Channel with + and – Frequency 182.31 MHz Confirm with OK Scan operation 7. Programming stations wish to replace with the new station). • Move the cursor to „Frequency/Channel“. •... -
Page 17: Station Logo
8. Station logo Each station which transmits VPS signals also sends a station logo with up to eight characters, which is automatically assigned to this station in the station list. If this automatic function does not work correctly, or if you want a different station logo, you can overwrite the logo manually. -
Page 18: Sorting Stations
Call the menu MENU 009 MDR 008 SW 3 007* Picture-Volume 006 PRO 7 AV devices 005 RTL Station table Station table 004 SAT 1 003 Bayern 3 Timer 002 ZDF Configuration 001 ARD F1: End Move, copy, delete: Select one or more stationswith OK. Move cursor to new position White: Clear all + = copy, - = move, II = delete... -
Page 19: Selecting Stations
10. Selecting stations Station selection and programme posi- tion management Your TV set can manage up to 999 programme positions in the station table. You can select these programme positions with the numeric keys, with the oval „P+/P-“ rocker key or via the station table. -
Page 20: Picture Settings, General
Call the menu MENU Picture-Volume AV devices Sound set.prog.po Station table Sound settings, gen. Timer Pict. set.,prog. posn.* Configuration Pict. settings, gen. : select Contrast menu item Standard value Accept 61 as the standard value: * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. - Page 21 11. Picture settings, general In a menu with two asterisks (**), the set- tings for certain menu items cannot be changed. Panorama function This setting can be made only on 16:9 TV sets. The panorama function can be used to expand "normal"...
-
Page 22: Picture Settings For A Specific Programme Position
Call the menu MENU Picture-Volume AV devices Station table Sound set.prog.po Sound settings, gen. Timer Pict. set.,prog. posn.* Configuration Pict. settings, gen. : select These settings apply to the currently selected menu item programme position. * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. -
Page 23: Sound Settings, General
12. Sound settings, general In a menu with two asterisks (**), the set- tings for certain menu items cannot be changed. You can adjust the sound settings (volume, treble, bass, etc.) for all programme positions and save these settings as the standard values. These stan- dard values can be recalled at any time by pres- sing the „OK“... -
Page 24: Sound Settings For A Specific Programme Position
Call the menu MENU Picture-Volume AV devices Sound set.prog.po Station table Sound settings, gen. Timer Pict. set.,prog. posn.* Configuration Pict. settings, gen. : select These settings apply to the currently selected programme menu item position. * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. -
Page 25: Colour Standard
13. Colour standard In a menu with two asterisks (**), the set- tings for the menu item "Colour standard" cannot be changed. Your TV set normally detects the colour standard (PAL, SECAM, NTSC, NTSC44, PAL60, PAL M) automatically. If this automatic function does not work, you can select the colour standard manually. -
Page 26: Display Configuration
Call the menu MENU Operation Picture-Volume Function for F3* AV devices Function for F1* Station table EURO sockets* Station search Timer Country* Configuration Configuration Language* : select Brightness of Display 3 Permanent display menu item Operation Picture-Volume Function for F3* AV devices Function for F1* Station table... -
Page 27: Child Lock
15. Childlock With this function, you can determine when the TV set can be switched on and which program- mes may be viewed at specific times. The child- lock may be set: a) for all programmes, b) so that one to six programmes (Prog A ... Prog F), called permitted programmes can still be viewed, c) so that all or all permitted programmes may be... - Page 28 Call the menu Picture-Volume AV devices Time settings Station table Timer control Timer Timer Reminder* Configuration Childlock : select Code * * * * menu item * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. 15.
-
Page 29: Reminder
16. Reminder In a menu with two asterisks (**), the set- tings for the menu item "Reminder" cannot be changed. If you want to be reminded of something while watching television, you can set a reminder time. At this time, a box with the reminder appears on the screen of the TV set. -
Page 30: Timer Control
Menü aufrufen MENU Picture-Volume AV devices Time settings Station table Timer control Timer Timer Reminder* Configuration Childlock : select Power-on time, power-off time and sleep timer can menu item be set here. * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. -
Page 31: Setting The Time
18. Setting the time Normally, the TV set gets the date and time from the data transmitted with the programme (if this station transmits Teletext) and sets the internal clock accordingly. If the data are not received correctly, or if the sta- tion you are watching does not send such data, you can set the date and time manually. -
Page 32: Function Keys
Call the menu MENU Operation Picture-Volume Function for F3* AV devices Function for F1* Station table EURO sockets* Station search Timer Country* Configuration Language* : select The function key can be programmed with any desired menu item function. * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. -
Page 33: Special Functions
20. Special functions AV-PIP (picture-in-picture) An AV picture (such as that from a security camera) can be displayed within the picture from the currently selected station. Activating AV-PIP (picture-in-picture): • If "F1" is already programmed with the function "Picture in picture", briefly press the "F1" key; otherwise, hold the "F1"... -
Page 34: 9-Programme Overview
Call the menu SAT 1 PRO 7 Not possible with an external satellite receiver! 20. Special functions 9-programme overview With this function, you can open an overview of the current programme position and the next eight positions. The nine small programme windows are updated at intervals. -
Page 35: Picture Format (16:9, 4:3, Panorama
20. Special functions Picture format Calling the picture format function: • If "F1" is already programmed with the function "Picture format ", briefly press the "F1" key; otherwise, hold the "F1" key depressed until "Special functions 1" is displayed and then press key and select the desired picture format. -
Page 36: Teletext
Call the menu TEXT TV Guide 2 FS-Sendungen ARD morgen Themen Subjects ARD heute Chapter TV Guide Sport 1 Pages Wetter Next BookMark tagesschau Set BookMark Übersicht Cursor: select Sub- jects / Section. OK: display page Blue preselection key Yellow preselection key White preselection key ©... - Page 37 21. Teletext Double font size When viewing Teletext pages, you can switch to a larger font with the F1 key. The first time you press this key, the upper third of the page is displayed with the large font. Pressing it again displays the centre third of the page and pressing it a third time displays the bottom third of the page.
- Page 38 3) Not possible with an external satellite receiver! 21. Teletext Teletext: scrolling by marks With Teletext active, you can scroll sequentially through all marked pages by repeatedly pressing the green key You can even view your favourite pages directly from the TV mode with the „TEXT“ key. Pressing the „TEXT“...
-
Page 39: Av Devices
22. AV devices AV (Audio/Video) devices are devices which provide picture and/or sound signals for play- back on your TV set (for example, video cas- sette recorders, DVD players, etc.). In the menu „AV devices“, the setting window displays a list of all common AV units. Always connect AV devices exactly as shown in the connection diagram in the TV menu of your TV set! - Page 40 Call the menu In a menu with two aste- risks (**), the settings for this menu item cannot be changed. MENU Operation Picture-Volume Function for F3* AV devices Function for F1* Station table EURO sockets* Station search Timer Country* Configuration Configuration Language* : select...
-
Page 41: Av Playback
22.1 AV playback AV playback (Devices with switching voltage) AV playback is the term for playing back video- cassettes, DVDs, etc. from an AV device for vie- wing them on a TV set. In order to view the pictures, you must program- me your TV set so that it automatically switches to the AV programme position when a signal is received at the EURO socket to which the AV... - Page 42 Call the menu AV menu Playback In a menu with two aste- risks (**), the settings for the menu item "VCR" can- not be changed. 2) Available only on TV sets which are equipped with this option. 22.1 AV playback AV playback (Devices without switching voltage) In order to view the pictures, you must manually...
-
Page 43: Copying Recordings Between Av Devices
22.2 Copying between AV devices • Select any programme position. • Press the „AV“ key to display the „AV menu Playback“. • Select the AV playback device with the numeric keys. • The TV set switches from the current programme to the selected playback device. -
Page 44: Epg - Nextview
Not possible with an external satellite receiver! 23. EPG - NexTView NexTView is an Electronic Program Guide (EPG) for all important programme providers. This EPG is transmitted by various stations and also contains the programme data for the other stations. The TV set needs about 20 minutes to collect the large amount of data for the first time. -
Page 45: Activating The Epg Nextview
23.1 Activating the EPG NexTView The EPG function can be switched on by pressing the keys "F3" and if an EPG programme posi- tion is defined in the menu (see below). On all programme positions where NexTView is received, the TV set displays the following messa- ge after a short delay: This station is sending NexTView (EPG). -
Page 46: Collecting Nextview Data
23.2 Collecting NexTView data The EPG NexTView is transmitted by various stations and the information pro- vided by each station may differ. You thus have a choice between several dif- ferent NexTView programme guides. • On TV sets with only one tuner (e.g. if your set has been converted and has only one satellite tuner): Switch to the NexTView programme... -
Page 47: Using Nextview
23.3 Using NexTView Once all of the data have been collected, pres- sing the "F3" and key displays the NexTView programme guide, showing the programme cur- rently running on this programme position. The left column of the EPG shows the keys with special functions in this mode: P+/P- Select a programme Watch the selected programme or set a... - Page 48 Call the menu Music Education Children/School All programmes Sport Selection Leisure Interest Interest Shows Current affairs Users Feature film Record Station selection Up to eight stations can be selected Music Education Children/School All programmes Sport Selection Leisure Interest Interest Shows Current affairs Users Feature film...
-
Page 49: Recording A Programme
23.3 Using NexTView Recording a programme If you have a Metz video recorder with dialogue system, the NexTView programme guide permits you to start a recording by pressing a single key. • Open the NexTView programme guide. • Use the "P+/P-" rocker key to select the pro- gramme you want to record. -
Page 50: Initial Programme Position
Call the menu MENU Operation Picture-Volume Function for F3* AV devices Function for F1* Station table EURO sockets* Station search Timer Country* Configuration Language* : select menu item Switch on with this station? Yes * The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu. -
Page 51: Operation Without The Remote Control Unit
25. Operation without the remote control unit The following procedures are intended only for cases where the batteries of the remote control unit are exhausted or the remote control unit is not available. The TV controls are at the front of the set. Depen- ding on the TV model, they are located underne- ath a cover which can be opened by pressing at the marked position. -
Page 52: Technical Data
26. Technical data Mains voltage: 230 V ˜ 50 / 60 Hz 240 V ˜ (Australia only) Antenna input:: 75 Ohms unbalanced DIN 45325 Reception bands: Standard channels 2 - 12, 21 - 69 Special channels S1 - S20, S21 - S41, S42 .. -
Page 53: Options
27. Options • Satellite upgrade kit 081 NH 1017 for reception of satellite stations without the need for a separate SAT receiver. • Satellite upgrade kit 083 NH 1014 similar to the above, but also capable of recei- ving unencrypted ADR (Astra Digital Radio) sta- tions. -
Page 54: Connecting Headphones
28. Connecting headphones The headphone socket is located on the front of the TV set. On many models, you must first open a cover by pressing at the marked location in order to expose the socket. We recommend using headphones with an impe- dance of at least 32 Ω. -
Page 55: Glossary
30. Glossary AV programme position AV devices have one or more sockets, depending on the model. These sockets are labelled on the device, for example with AV1. These sockets can be selected on the AV device and the selected socket is shown on the display of the AV device, for example A1 for socket AV1. - Page 56 30. Glossary Forced mono In some cases, your TV set may switch from mono to stereo during a programme, although the sta- tion is not transmitting a stereo signal. This is nor- mally due to the local reception conditions. If you activate „forced mono“...
- Page 57 30. Glossary Spatial sound An artificial stereo effect can be generated for mono transmissions. SRS WOW WOW, a special combination of audio technolo- gies from SRS Labs, Inc., creates a unique liste- ning experience, complete with deep rich bass, and fuller, better sounding audio. When the WOW function is activated, it restores many of the spatial cues and ambient information that are lost during standard stereo playback.
-
Page 58: Troubleshooting
Problem The TV set does not • There is no visual contact bet- react to commands from the remote con- trol unit. • Sunlight is falling directly on • The batteries in the remote • The TV set has been switched •... - Page 59 Problem Immediate recording • The Data Logic video recorder of a terrestrial sta- tion (received via your house antenna or cable) with Data Logic does not work. General problems • The AV device has not been with an external AV device connected to the TV set.
-
Page 60: Index
Index utomatic station search ....14 Automatic zoom .....26 AV devices, connecting . - Page 61 Index nfo (information) ..... .8 Initial programme position ....50 anguage for TV menu .
- Page 62 Index Station search ..... . .15 Station search, automatic ....14 Stations, deleting .
- Page 63 ✍ ✍...
- Page 64 Errors excepted. Subject to changes. Printed in Germany Metz - allways first class. Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg Core competence in the areas of electronics and plastics technology to form the basis of the excellent reputation of the Metz Werke that has been built up throughout the world over a period of many decades.
Need help?
Do you have a question about the 70TL67 and is the answer not in the manual?
Questions and answers