Childlock; Switching On; Permitted Programmes - Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Operating Instructions Manual

Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to
five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to
children's programmess on selected channels. Access to such permitted programmes can be provided in general or within a specified
period of time.
Example:
The children shall only be allowed to watch programmes on the programme positions 01, 02 and 05 from 14.00 to 18.00 hr. Access to all
other programme positions shall be excluded.
Press this key on the remote
control....
1. Call the „Timer/childlock"
menu
MENU
green
2. Call the „Childlock"
submenu and switch on
the childlock
yellow
blue
-
3. Select and store permitted
programmes
yellow
1 2 3
4 5 6
7 8 9
0
OK

8.1 Childlock

The screen displays
return picture
TV
MENU
Timer/childlock
Time settings
1 2 3
4 5 6
7 8 9
Childlock
0
--/-
P
+
-
OK Timer recording
P
-
TV
MENU
Basic setting of MVS
?
A
AV
B
696+08F-GB
return picture
TV
MENU
Childlock
Childlock. . . . .
1 2 3
4 5 6
7 8 9

Permitted programmes:

0
--/- -- -- -- -- --
P
+
Enter code . . . . :
-
OK
P
-
TV
MENU
AV Begin viewing . :
?
A
AV
B
End viewing . . . :
6 9 6 + 0 8 G 1 - G B
return picture
TV
MENU
Childlock
Childlock. . . . .
1 2 3
4 5 6
7 8 9
Permitted programmes:
0
--/-
01 02 05 -- --
P
+
Enter code . . . . :
- OK
P
-
TV
MENU
Begin viewing . :
AV
?
A
AV
B
End viewing . . . :
6 9 6 + 0 8 H 1 - G B
store ?
Help
?
The childlock can be switched on and off with the
Help
?
keys.
If you set the childlock to „ON", you must also enter a
4-digit personal code number.
On
If the childlock has been set previously, this setting
will be used and the television switches to standby
mode.
- - - -
The TV set can now still be switched on, but programmes
will not be shown on the screen. Instead the „Childlock"
- - : - -
menu will be displayed with the cursor on the „Enter
code" line.
- - : - -
The childlock can be turned off again by entering the
4-digit personal code number.
The TV is automatically switched to standby mode after
approx. 10 minutes if it has not been switched off
manually in the meantime.
A maximum of 5 programme positions can be entered
Help
?
to which access is permitted.
These programme positions are entered with the
numeric keys; all entries can be erased with the C key.
On
Back to the example:
Enter the programme positions which are to be
accessible. In this example, the programme positions
- - - -
01, 02 and 05 have been entered.
- - : - -
Before continuing with the next programming steps,
the permitted programme positions entered above
- - : - -
must be stored; otherwise the entries will be lost.
OK

Switching on

Explanation
-
29