9X Multipicture, Slow Motion, Film In Photo - Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Operating Instructions Manual

Press this key on the remote
control....
Call this function and return
to the normal picture
*
A
or or
*
B
Call the zoom function and
return to the normal picture
red
Call this function and return
to the normal picture
*
A
or or
*
B
Adjusting the slow-motion
delay
MENU
red
red
white
-
44
11. Special picture effects
The screen displays
*
C
11. Special picture effects
11. Special picture effects
*
C
return picture
TV
MENU
Equipm. configuration
Prog. change settings
1 2 3
4 5 6
7 8 9
RGB priority:
--/- 0
P
+
-
OK
Slow motion delay 1,0s
P
-
TV
MENU
AV Sound settings:
?
A
AV
B
REC
Display configuration
696+05B1-GB
Before the 9x multipicture function can be used, it must be
programmed as a function in the menu „Function keys".
The section „Equipment configuration, Assigning the
function keys" describes how this is done.
This function is similar to a slow-motion display. Eightof the
nine pictures on the screen show still pictures from the cur-
rent programme (or video film), while the picture at the bot-
tom right is a moving picture of the current programme (or a
video film).
This function can also be combined with the still picture function.
* Depending on how the function keys are program-
med.
Before the film-in-photo function can be used, it must be
programmed as a function in the menu „Function keys".
The section „Equipment configuration, Assigning the
function keys" describes how this is done.
When the programmed function key is pressed, the
picture is frozen and a small box with a photo is dis-
played at the top left corner of the screen.
The current programme (or video film) continues to run
in this small box.
This function is not possible on PIP televisions!
Before the slow-motion function can be used, it must be
programmed as a function in the menu „Function keys".
The section „Equipment configuration, Assigning the
function keys" describes how this is done.
When this function is called, the screen is divided into nine
small fields, each of which displays a still picture, updated
every few seconds, from the current programme.
This function can also be combined with the still picture
function.
* Depending on how the function keys are programmed
The slow-motion delay is in the interval at which indivi-
Help
?
dual frames are displayed in slow-motion mode.
This delay can be adjusted in steps of 0.1 seconds bet-
ween 0.1 and 2.0 seconds.
Yes
Note: this setting does not apply to the programme
scanning functions with three or nine pictures.
Yes
store ?
OK
9x multipicture
Explanation
Film in photo
Slow-motion
Slow-motion delay