Time Programming Function; Switching An Element Off Automatically - Bosch NIT8665UC Use And Care Manual

Time programming function

Switching an element
off automatically
Once the time has elapsed
Correcting the time
Cancelling the automatic
OFF function
This function may be used in two different ways:
- to switch an element off automatically
- as a timer
WARNING: The timer should not be used as a safety measure in order to leave the
d
cooktop unsupervised during use, especially at high temperatures. Breaded items
can smoke. Overheated food and oil can catch on fire.
Supervise the cooktop even if the time program is on.
Enter the time period for the required element. The element will switch off
automatically once this time has elapsed.
1. Select the element and heat setting required. Then press the Timer symbol.
The kk, Min and ___ indicators light up on the time programming function
display.
The 0 indicator lights up on the selected element.
2. Program time using the 0 to 9 symbols.
After a few seconds, the programmed time will start to count down.
The last programmed cooking time will appear in the display.
The element switches off once this time has elapsed. You will hear a beep.
The indicators 0.0 and 00 light up.
The indicators switch off and the display beep turns off by pressing the Timer
symbol.
Select the element and then press twice the Timer symbol.
The min, ___ and r indicators light up.
Program time using the 0 to 9 symbols.
Select the desired element and then press twice the TIMER symbol.
The min, ___ and r indicators light up.
Then press the 0 symbol until kk is displayed.
23