Table of Contents
Advertisement
Figure 25 Wireless Station Adapter
Take the following steps to build your station adapter.
Configure the Ag-3621 mode as a station adapter.
establish a tie between station1 and station2 and the AP..
Wirelessly connect the AG-3621 to the AP via BSSID.
Wireless Bridging Mode
It provides the two bridging modes. Wireless Point-to-Point Bridge and Wireless Point to
Multi-Point Bridge.
From the WDS Mode, enter the MAC Address of the AP you desire to connect as below.
Local MAC Address
This field provides the AG-4621 MAC address.
Remote MAC Address
Enter the MAC Address of your desired devices connected to the AG-3621 in WDS Mode.
Uplink Speed Limit
You can specify the transmission rate between the AG-3621 and other devices by entering
the value in uplink speed limit. The most speed available is 1687 ×64Kbps=105.4375Mbps.
Advanced Settings
34
Advertisement
Table of Contents
