Table of Contents
Advertisement
Figure 24 Wireless Access Point
1.
Configure the AP mode as access point.
2.
Configure the basic information like profile name and SSID.
Wirelessly connect station1 and station2 to the AP.
3.
If the communication has been establish between the APs and stations, the LEDs will
4.
light up. How many LEDs will light up depends on the amounts of the stations connected
to the AP.
Note
Securities are required to ensure safe communication. Further, wireless
client isolation is needed to protect the clients against illegal invasion.
Station Adapter Mode
Acting as a station adapter, the AG-3621 is linked to other access points.
Advanced Settings
33
Advertisement
Table of Contents
