Wireless Information About The Ag-3621 - Formosa AG-3621 Manual

station. WEP should be used to protect this communication.
Wireless Mode: Select the desired wireless operating mode. The default mode is 802.11a.
Channel
This field identifies which operating frequency will be used.
Security Profiles
This provides a list of virtual APs derived from AG-3621 Virtual AP, spelling out profile name,
SSID, MAC, security, and status.
Build Wireless Point-to-Point Bridge Mode
Under this mode, two separate networks located apart can be connected to carry out
data-transmission about several thousand miles away
Create a connection between AP and wireless station separately.
Open the AG-3621 management web through entering the default factory IP Address
192.168.1.1, user name—admin and password—password. Enter the other AP's name on the
MAC address field, respectively,

Wireless Information about the AG-3621

The following describes the advanced wireless parameters.
Field
RTS Threshold
Fragmentation Length
Beacon Interval
DTIM Interval
Description
The packet size used to determine whether it
should use the CSMA/CD (Carrier Sense
Multiple Access with Collision Detection) or
the CSMA/CA (Carrier Sense Multiple Access
with Collision Avoidance) mechanism for
packet transmission.
This is the maximum packet size used for
fragmentation. Packets larger than the size
programmed in this field will be fragmented.
The Fragment Threshold value must be
larger than the RTS Threshold value.
Specifies the data beacon rate between 20
and 1000.
The Delivery Traffic Indication Message
specifies the data beacon rate between 1 and
255.
16