Virtual Server; Figure 21 Firewall List - Formosa AG-3621 Manual

This specifies the starting-point of your specific IP addresses.
IP Range End
This specifies the ending-point of your specific IP addresses.
Protocol
This is optional, TCP, DCP, ICMP or *. Select which protocol you want to perform "Allow" or
"Deny".
Port Range
This specifies your IP port range.
Schedule
You can set time when your AP performs firewall management, by enabling "from".
Alternatively, if you desire your AP to perform firewall management for a long time, please
enable "always".
When completing all firewall rules configuration, please click Add Rule. Firewall Rule List will
appear below.

Figure 21 Firewall list

Virtual Server

Note
Virtual server can be enabled only under router mode.
access point distinguishes by acting as a virtual server. This most cost-effective server
virtualization technology is engineered for heterogeneous network. Please refer to the
following diagram.
Under router mode, designed for the virtual server, the AP is wirelessly coupled to FTP server,
mail server and log server on LAN port; on WAN port, the AP is coupled to PC. The AP is the
virtual server, so that you have access to download files, enjoy e-mails or undertake others,
only via your PC.
Advanced Settings
The
AG-3621
28