Formosa AG-3621 Manual page 21

the wireless features of the wireless access point in a region other than one of those identified
in this field. The default country is the United States.
Firmware Version
Firmware is stored in a flash memory and can be upgraded easily, using your Web browser,
and can be upgraded via ftp server or ftp server. The currently available version of AG-3621 is
1.1.3.0.
IP Type
By default, the AG-3621 is configured as static IP Address.
IP Address: The IP address must be unique to your network. The default IP address is
192.168.1.1.
Note
To associate the access point to your PC, make sure the PC IP address
need to be matched the AP. For instance, the AG-3621 is 192.168.1.1, and
your PC IP should be 192.168.1. X.
Subnet Mask
The Subnet Mask must be the same as that set on the LAN that your Access Point is
connected to. The default is 255.255.255.0.
Operating Mode
AG-3621 provides five modes, Access Point, Station, bridge, repeater and inter-building.
Access Point: Act as a standard 802.11a/b/g. The default mode is Access Point.
Station: Perform as a client station associated to other APs. Be sure that they share the same
SSID when connected.
Bridge
The AG-3621 acts as a bridge connecting APs. Two bridge modes are available below.
Point-to-Multi-Point Bridge
Select this only if this AG-3621 is the "Master" for a group of bridges. The other bridge must
use this AG-3621 MAC address. They then send all traffic to this "Master", rather than
communicate directly with each other. WEP should be used to protect this traffic.
Wireless Repeater
In this mode, the AG-3621 can communicate with another wireless station or wireless bridge.
You can enter the MAC address of both adjacent repeaters in the fields provided to
communicate with other wireless bridge or use SSID to communicate with other wireless
15