Important Bar Codes; Scale Save Data Bar Code; Scale Type Bar Code - Metrologic Stratos MS2x20 Series Configuration Addendum

I N - B Y S
MPORTANT OTES EFORE OU TART

Important Bar Codes

Scale Save Data Bar Code.

The Scale Save Data bar code must be scanned last to "save" the changes in the
scale's memory. The scale will then reset and begin normal operation. This is
required only for scale configuration items – not for calibration.
Scale Save Data
³ 9 9 6 0 4 5

Scale Type Bar Code.

The Stratos scanner should have been already programmed to recognize the
type K Diva scale. If, for any reason, the scanner's non-volatile memory is lost,
the following bar code must be scanned to reprogram the scanner for the
type K Diva scale.
Type K Diva Scale
³ 4 4 6 5 1 0
2