Scale Com Port Settings (Baud Rate) - Metrologic Stratos MS2x20 Series Configuration Addendum

S C
CALE ONFIGURATION
Dual Cable Scale Configuration Bar Codes
COM Port Settings (Baud Rate)
The following bar codes will change scale parameters intended for a
Dual Cable environment.
If a Scale Protocol bar code from page 12 to 17 is used, the bar codes
below must be scanned after the Scale Protocol bar code in order to be
effective.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily
disconnect the Scale to Host cable prior to configuring the scale.
The MS2xx0 does not need to be in scale service mode.
The Scale Save Data bar code must be scanned last to save the
changed configuration (see page 2).
Scale = 2400 Baud Rate
³ 9 9
Scale = 9600 Baud Rate
³ 9 9
B
AR
6 0 1 7
6 0 1 8
C
ODES
Set the scale baud rate for dual cable
applications to 2400 baud.
Set the scale baud rate for dual cable
applications to 9600 baud.
18