Scale /Load Cell Configuration Bar Codes; Single Or Dual Cable Scale Configuration Bar Codes; Unit Configuration (Pounds) - Metrologic Stratos MS2x20 Series Configuration Addendum

S /L
CALE OAD

Single or Dual Cable Scale Configuration Bar Codes

Unit Configuration (Pounds)

For Kilogram weight units see page 4.
The following bar codes can be used to configure a Single or
Dual Cable MS2xx0.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily
disconnect the Scale to Host cable prior to configuring the scale.
The MS2xx0 must be in scale service mode to use these
bar codes.
Pounds Calibration
³ 9 9
3
C C
ELL ONFIGURATION
6 0 4 2
B C
AR
Set the scale measuring range from
0.00 to 30.00 pounds.
ODES