Default Settings - Metrologic Eclipse MS5100 Series Installation And User Manual

D S
EFAULT ETTINGS
Many functions of the scanner can be "configured" or enabled/disabled. The
scanner is shipped from the factory configured to a set of default conditions. All
default parameters of the scanner have an asterisk ( * ) marked in the default
column. If an asterisk is not in the default column then the default setting is off or
disabled. Every interface does not support every parameter. A check
mark ( ) will appear in the interface column if it supports the parameter listed.
Parameter
Normal Scan Mode
Continuous Scan Mode
Blinky Scan
Continuous Blinky Scan
Custom (one shot) Scan
Manual Activation Mode
CodeGate Active
CodeGate Inactive
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 check on ITF
Code 11
Code 39
Full ASCII Code 39
28
Default OCIA RS232
*
*
*
*
*
*
*
*
Light IBM
KBW
Pen 46xx
Laser
USB
Emulation