Setting The Base Ringer Volume - Uniden DSS 5855 series Owner's Manual

If you receive an
incoming call, press
talk/flash or spkr on
the handset, or
(talk) or on the
base the operation will
be canceled.
[ 38 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
Choosing between the two outgoing messages
When the phone is in the standby mode, press greeting. Press greeting again when the
outgoing message is played. Each time greeting is pressed, the outgoing message is
switched between the pre-recorded and the personal outgoing message.
Deleting an outgoing message
To delete the personal outgoing message, press
The system announces "Greeting has been deleted".

Setting the base ringer volume

You have three ringer options. One allows you to turn the base ringer off. The other two
are volume levels.
1) When the phone is in the standby mode, press set/ringer. You hear the ringer at the
current volume level ("
volume to off "Off" is announced), and it appears on the base.
2) Press set/ringer until the desired ringer volume appears. The system returns to the
standby mode.
You can also set the base ringer volume while the phone is ringing, press set/ringer
repeatedly to select the desired ringer volume.
while the message is playing.
" High, " " Low, or " " Off) (if you set the base ringer