Using Special Features; Using Do Not Disturb; Adjusting The Base Visual Ringer; Using The Audio Boost - Uniden XDECT SSE25 Series Owner's Manual

Using Do Not Disturb

Do Not Disturb or DND feature turns off the audio ringers of the
The

base and all handsets at the same time. It does not affect any of the
visual ringers.
With the phone in standby, press and hold

The phone automatically turns on the answering system and shows Do
Not Disturb in the display on all handsets.
To cancel, press

If you turn the answering system off while DND is on, the phone
turns off DND along with the answering system.

Adjusting the Base Visual ringer

The
VISUAl rINGEr
of the base; use this switch to change
the brightness of the base visual ringer.
(It doesn't affect the audio ringers.)
Slide the switch so that its center
(marked with the arrow in the picture)
lines up with the brightness you want to
use: , , or
HIGH LOW

Using the Audio Boost

You can increase the earpiece volume for normal calls and intercom calls.
During a call, press
audio boost is on,

Using Text-To-Speech

With the Text To Speech (TTS) feature, your phone can announce phone
numbers or names in several different situations.
When you... (from standby) The phone announces...
Receive a call
Dial a number
Open the phonebook
16
XDECT SSE25 OM.indd 16

Using Special Features

.
DO NOT DISTUrb
switch is at the back
.
OFF
to increase the volume of the audio. While
bOOST
appears in the display. Press
The caller's name (if sent by a Caller ID service)
The phone number you dialed
The name of the entry you are looking at
on the base.
DO NOT DISTUrb
again to turn off.
bOOST
23/12/09 11:17:56 AM