Design Specifications - Metrologic MS7320 InVista Series Installation And User Manual

D S
ESIGN PECIFICATIONS
O
PERATIONAL
Light Source:
Laser Power:
Depth of Field:
Width of Scan Field:
Scan Speed:
Scan Pattern:
Scan Lines:
Min Bar Width:
Decode Capability:
System Interfaces:
Print Contrast:
No. Characters Read:
Roll, Pitch, Yaw:
Beeper Operation:
Indicators (LED):
M
ECHANICAL
Dimensions:
Footprint of Stand
Weight:
Termination:
Specifications are subject to change without notice.
34
MS7320 S
Visible Laser Diode (VLD) @ 650 nm
0.678 mW (peak)
0 mm to 215 mm (0"- 8.5") for
0.33 mm (13 mil) bar code
38 mm (1.5") @ 15 mm (0.6");
135 mm (5.3") @ 191 mm (7.5")
2000 scans/second
5 fields of 4 parallel lines (omnidirectional)
20
0.127 mm (5.0 mil)
Autodiscriminates all standard bar codes; for other
symbologies call Metrologic
PC Keyboard Wedge, RS232, OCIA, Light Pen,
Stand Alone PC Keyboard, USB, IBM 468x/469x
35% minimum reflectance difference
up to 80 data characters (Maximum number will vary
based on symbology and density)
360°, 60°, 60°
7 tones or no beep
green = laser on, ready to scan
red = good read, decoding
185 mm (7.3") H, 99 mm (3.9") D,
168 mm (6.6") W
64 mm (2.5") x 64 mm (2.5")
1.2 Kg (2.65 lbs)
Three 10-pin modular RJ45 jacks
Standard 2.1m (7') straight; for other cables call
Cable:
Metrologic
D S
ERIES ESIGN PECIFICATIONS