D-Link ShareCenter DNS-345 User Manual page 67

Section 4 - Configuration
Enter the amount of disk space you would like to assign to
the second volume for RAID 1 and then check the box next
to 'Configure the remaining disk space as JBOD' if you wish to
configure the remaining space as JBOD.
Click Next to continue.
Click Enable Auto-Rebuild to automatically rebuild a failed
drive if it has been replaced with a new one.
Select Disable Auto-Rebuild if you want to start the rebuild
process manually after replacing a failed drive.
Click Next to continue.
D-Link ShareCenter DNS-345 User Manual 62