× Bookmark added
Page of 265
Download Table of Contents

D-Link ShareCenter Quattro DNS-345 User Manual

4-bay network attached storage device.
Hide thumbs

Advertisement

Advertisement

   Also See for D-Link ShareCenter Quattro DNS-345

   Related Manuals for D-Link ShareCenter Quattro DNS-345

   Summary of Contents for D-Link ShareCenter Quattro DNS-345

  • Page 2: Table Of Contents

    Disk.Management........... 51 Drives..............21 Hard.Drive.Coniguration........51 Replace.the.Front.Cover.and.Connect.to.the. Hard.Drive.Coniguration.Wizard...... 52 Local.LAN............22 JBOD..............59 Power.and.Device.Selection......23 RAID.0.............. 64 Admin.Password..........24 RAID.1.............. 69 Networking.Setup..........25 RAID.5.............. 77 Dynamic.DNS........... 26 D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 3: Table Of Contents

    Applications.-.FTP.Downloads......211 Admin.Password..........158 Remote.Backups..........213 Active.Directory.Settings......... 159 Local.Backups..........218 Distributed.File.System........160 Local.Backups.-.Time.Machine....... 219 Network.Management........165 Local.Backups.-.USB.Backups....... 220 Network.Management.-.DDNS....... 170 USB.Print.Server..........224 Network.Management.-.UPnP.Router. P2P.Downloads.-.Settings......232 D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 4: Table Of Contents

    Photo.Center........... 236 My.Favorites............241 Add.an.Icon.to.My.Favorites......242 Removing.an.Icon.from.My.Favorites..... 243 Knowledge Base ............244 What.is.RAID?............244 RAID.OPTIONS..........246 RAID.Comparison.Chart......... 249 USB.Print.Server..........250 UPS.Connectivity..........254 Deleting.a.UPS.Slave........... 259 Knowledge Base ............261 What.is.Ethernet.Bonding?........261 D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 5: Introduction

    UPnP AV media server as you stream digital content to compatible media players (such as those found in D-Link’s MediaLounge product line). This feature is very convenient as it allows you to turn off a computer that would normally be needed for the same function.

  • Page 6: Before.you.begin

    XP (with Service Pack 2), Windows Vista , Windows 7 ® ™ ™ ‘ „ Windows 2003 Server „ Windows 2008 Server „ Mac OS X 10.5.6 or greater „ 3.5” SATA Hard Drive(s) D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 7: Product Overview

    D-Link ShareCenter™ Quattro DNS-345 „ CD-ROM with Manual and Software „ Quick Installation Guide „ Power Cord and 19VDC 4.74A Output Power Adapter „ Cat5E Ethernet Cable CDROM Manual Software Power Cord Ethernet Cable Quick Installation Guide D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 8: Features

    • Supports RAID migration: Standard to RAID 1, Hard Drive life Standard to RAID 5, RAID 1 to RAID 5 • Supports Auto Power Recovery • Supports Advanced Format HDD • Supports Schedule Power ON/OFF D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 9

    • Supports HTTPs management • Network Recycle Bin • Supports Yahoo Widgets • Supports System Logging/FTP logging • Automatic e-mail and SMS notiications • Supports network UPS • Supports SNMPv2 • Supports Resource Monitor D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 10: Checking.the.hardware.requirements

    • Understand the basic requirements for a router or switch Selecting Hard Drives: You can use hard drives from any manufacturer and with any capacity with your ShareCenter Quattro. All D-Link devices support standard 3.5” internal SATA drives. If you are unsure, ask your administrator or hard drive retailer/ manufacturer to verify that your hard drives meet this standard Warning - Any pre-existing data on the drives will be erased during installation.

  • Page 11

    The ShareCenter Quattro DNS-345 makes it easy to increase storage capacity in the future by simply inserting additional drives or replacing smaller drives with larger ones. This means you can buy the hard drives one day and then easily expand another day.

  • Page 12: Setting.up.in.just.a.few.easy.steps

    1. Insert the hard drives 2. Connect the power and LAN cables to your ShareCenter Quattro 3. Power on the device 4. Run the D-Link ShareCenter Setup Wizard to conigure the NAS 5. Conigure the hard drives D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 13

    Section 2 - Getting Started Part I D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 14: Hardware.overview

    Section 1 - Product Overview Hardware Overview Front Panel Front Bezel The front bezel comes off to reveal the hard disk drive rack D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 15

    With the front cover off, SATA hard drives can be slid in and out of the of ShareCenter Quattro. Use Drive.Tray the tabs on the rear of the ShareCenter Quattro to initially push a HDD out of its connector and tray. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 16

    Celsius storage capacity. drive(s) are present. Disconnected means there and Fahrenheit. No amber lights - the hard is no connection. drive(s) are absent Welcome to D-Link System Shutdown ShareCenter D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 17

    Section 1 - Product Overview Enter Backup mode Backup from NAS to USB Backups are complete D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 18: Rear.panel.(latches)

    Section 1 - Product Overview Rear Panel (Latches) Rear Hard Drive Latches Click the rear latches to disconnect the hard drives from the SATA sockets. Note - Remove the front cover before releasing the latches. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 19: Rear.panel.(connections)

    Power Receptacle Gigabit Ethernet Ports Cord Hook USB Port HDD Eject Lever Cooling Fan HDD Eject Lever COMPONENT DESCRIPTION Cooling.Fan The.cooling.fan.is.used.to.cool.the.hard.drives.and.features.speed.control..When.the.unit.is.irst.powered.on. the.fans.rotate.at.a.low.speed.and.rotate.at.a.high.speed.when.the.temperature.rises.above.49.°C. Gigabit.Ethernet.Ports Use.the.Gigabit.Ethernet.Ports.to.connect.the.ShareCenter.Quattro.to.the.local.network..The.port.is.equipped. with.both.a.LAN.Link/Trafic.(R).and.Speed.LED.(L).to.indicate.connectivity.and.trafic.respectively.to.the. local.LAN..Dual.LAN’s.support.Port.Bonding. Power.Receptacle Connect.the.supplied.power.cord.to.the.receptacle. USB.Port A.single.USB.2.0.(Type.A).connector..The.USB.Host.port.is.for.Print.Servers,.USB.memory.disks,.or.USB. UPS.monitoring. Reset.Button Press.and.hold.this.button.for.more.than.5.seconds.to.reset.the.unit.to.factory.defaults. HDD.Eject.Lever Use.each.slot’s.lever.to.eject.the.HDD.drive.. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 20: Getting Started

    Section 2 - Getting Started Getting Started Hardware Setup This.User.Guide.will.help.you.get.your.ShareCenter.Quattro.set.up.in.just.a.few.steps..To.install.the.ShareCenter. Quattro.on.your.local.network,.refer.to.the.steps.below: Slide Up Remove. the. front. panel:. Firmly. grip. Insert.one.3.5”.SATA.hard.drive.into. the. panel. and. slide. it. up. until. the. 4. an.available.drive.bay. panel.hooks.clear.the.slot.openings. Note:.Make.sure.to.align.the.drive.connector.to.the.SATA.connector.at.the.back.edge.inside.the.drive.bay.of.the. ShareCenter.Quattro..Gently.push.the.drive.in.until.it.connects..When.a.drive.is.inserted.properly,.you.will.feel.it.“seat”. into.the.connector..Some.hard.drives.that.are.thin.or.oddly.shaped.may.need.to.be.guided.carefully.into.position..If.a. drive.is.not.properly.seated,.the.hard.drive.icon.will.not.illuminate.on.the.OLED.screen.after.powering.on.the.device. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 21

    LAN.1.Ethernet.port..This.cable.should. slots.on.the.chassis.and.slide.the.front. connect. the. ShareCenter. Quattro. panel.down.until.it.is.irmly.seated. to. your. local. network. via. a. router,. switch,. or. directly. to. a. computer. for. coniguration. Connect. the. power. adapter. to. the. power.receptacle. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 22: D-link.storage.utility

    If it does not receive a DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx address. It is recommended that you use the included D-Link Storage Utility software when accessing and coniguring the ShareCenter for the irst time. If you want to change the IP address before logging in or you have having trouble connecting to the ShareCenter IP address, you can then use the Storage Utility software included on the product CD to locate the device on your network and make any necessary changes.

  • Page 23

    Section 1 - Product Overview Select. the. ShareCenter. from. the. list. and. click. the. Coniguration. button.. This. will. launch. the. computer’s. default.web.browser.and.direct.it.to.the.IP.address.listed. for.the.device..Make.sure.the.browser.is.not.conigured. to.use.a.proxy.server. Note:.The.computer.used.to.access.the.ShareCenter web-based.coniguration.manager.must.be.on.the.same. subnet. as.the.ShareCenter.. If.your. network. is. using. a. DHCP.server.and.the.computer.receives.IP.settings.from. DHCP.server,.the.ShareCenter.will.automatically.be.in. the.same.subnet. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 24: Setup.wizard.and.storage.utility

    ShareCenter Quattro. You can now install the ShareCenter Setup wizard from the resource CD that came with your product. To run the Setup Wizard, insert the ShareCenter Quattro CD into your CD-ROM drive: Click.Setup.Wizard.Utility The.Setup.Wizard.will.step.you.through.the. coniguration. of. getting. your. ShareCenter. Quattro.ready.for.immediate.use..Select.the. Language.of.your.choice.and.click.the.Start. button. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 25: Remove.the.front.cover.and.install.the.hard Drives

    Section 2 - Getting Started Remove the Front Cover and Install the Hard Drives Follow.the.instructions.to.remove.the.front. Follow.the.instructions.to.slide.either.one.or. cover.of.your.ShareCenter.Quattro. two.hard.drive(s).into.an.available.hard.drive. bay.of.your.ShareCenter. Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 26: Replace.the.front.cover.and.connect.to.the Local.lan

    Replace the Front Cover and Connect to the Local LAN. With.the.hard.drives.installed.properly.into. Connect.a.Cat5E.Ethernet.cable.with.RJ-45. each. bay,. close. the. chassis. by. sliding. the. connectors.to.your.ShareCenter.and.connect. panel.down.into.place. the. other. end. to. a. switch. or. router. (Local. LAN). Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 27: Power.and.device.selection

    With. the. power. on,. press. the. Next. button. Connect. the. power. adapter. connector. on.the.device.and.check.and.make.sure.the. to. the. power. receptacle. at. the. back. of. IP. address. of. your. ShareCenter. Quattro. the. ShareCenter.. Then. power. on. the. matches.what.you.see.on.the.screen. ShareCenter™.by.pressing.the.power.button. located..under.the.OLED.screen. Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 28: Admin.password

    Section 2 - Getting Started Admin Password Enter.the.administrator.password..If.this.is. In.this.step.you.can.create.a.new.password. the.irst.time.you.are.doing.the.installation.on. for.the.‘Admin”.username..It.is.recommended. this.NAS,.leave.the.password.blank. you.set.a.password,.however.you.may.also. leave.the.ields.blank. Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 29: Networking.setup

    Networking Setup You. may. either. use. Static. IP. or. DHCP. to. You. may. either. use. Static. IP. or. DHCP. to. conigure.the.irst.IP.network.settings.of.the. conigure.the.second.IP.network.settings.of. ShareCenter.. If. you. select. Static. IP. then. the.ShareCenter..If.you.select.Static.IP.then. enter.the.IP.parameters.as.listed. enter.the.IP.parameters.as.listed. Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 30: Dynamic.dns

    Windows. Workgroup. network,. enter. the. have. a. DDNS. account. to. use. for. the. workgroup. name,. a. name. for. the. device,. ShareCenter.Quattro.DDNS..Click.the.‘No’. and. a. description.. The. name. you. entered. radio.button.and.proceed.to.step.16.to.obtain. will.be.used.whenever.you.map.one.of.the. a.new.DDNS.account. ShareCenter™.volumes.as.a.Network.Drive. Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 31: Ddns.account.setup

    Enter. the. DDNS. parameters. requested. in. and. links. on. how. to. obtain. a. free. DDNS. this.window.so.that.your.ShareCenter.can. account.. be.accessed.by.a.URL.over.the.Internet. Click. No. skips. the. DDNS. account. setup. Click.Next.to.continue. wizard. and. transfers. you. back. to. the. ShareCenter.Setup.Wizard. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 32: Ddns.account.and.system.time

    Section 2 - Getting Started DDNS Account and System Time Follow.the.steps.listed.here.in.order.to.create. Select. the. ShareCenter. system. time. date. a. DDNS. account. and. conigure. your. LAN. and.timezone.settings.using.this.step..You. equipment. and. ShareCenter. to. work. with. can.set.the.time.and.date.manually,.from.an. the.new.settings. NTP.server,.or.from.the.computers.settings.. The.timezone.is.set.manually. Click.Close.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 33: Email.settings.and.volume.information

    Section 2 - Getting Started Email Settings and Volume Information Configure. an. e-mail. service. with. the. This.step.shows.the.conigured.Volumes.set. ShareCenter. to. receive. e-mail. events. to. up.on.the.ShareCenter.Quattro. alert.users.of.any.changes.to.the.system. Click.Next.to.continue. You. must. have. all. mail. server. information. nearby.or.contact.your.systems.administrator. for.assistance. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 34: Raid.coniguration.and.encryption

    Section 2 - Getting Started RAID Coniguration and Encryption Select. one. of. the. 4. Volume. File. Systems. Once.the.RAID.coniguration.is.complete,.the. desired.. Clicking. on. each. ile. system. type. ShareCenter.Quattro.prompts.you.to.encrypt. radio.button.will.give.a.description.if.needed.. each.or.all.drives..Check.the.box.next.to.the. hard.drive(s).you.wish.to.encrypt. For.more.information.concerning.the.different. RAID.Disk.Formats.please.refer.to.the.user. Click.Next.to.continue. manual. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 35: Mapping.a.drive.and.checking.volume Summary

    Section 2 - Getting Started Mapping a Drive and Checking Volume Summary This.step.allows.you.to.map.the.volume(s). Review.the.detailed.summary.of.your.volume. created.as.network.drive(s).on.your coniguration.here.before.clicking.next.and. computer. starting.the.drive.format..If.necessary.use.the. PREV.button.to.go.back.and.reconigure.the. Click.Next.to.continue. RAID.comiguration.of.the.volume(s). Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 36: Formatting.volumes

    Section 2 - Getting Started Formatting Volumes When. you. click. Next,. a. warning. message. will.appear.to.inform.you.that.all.data.on.the. drive(s).will.be.lost..Click.Yes.to.proceed.or. No.to.exit. Click.Next.to.continue. During. the. format. process. the. wizard. displays.a.percentage.complete.bar.for.each hard.drive. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 37: Formatting.hard.drives.and.selecting.add-on Packages

    Section 2 - Getting Started Formatting Hard Drives and Selecting Add-on Packages The.wizard.will.notify.you.when.formatting.is. Your. ShareCenter. supports. Add-On. complete.successfully. packages.. Here. you. may. install. the. Audio. Streamer,. Blog,. SqueezeCenter,. Photo. Click.Next.to.continue. Center,. aMule,. and. AjaXplorer. add-ons. which.extend.the.application.functionality.of. your.ShareCenter.Quattro. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 38: Add-on.packages

    Section 2 - Getting Started Add-on Packages The. wizard. will. notify. you. that. the. Add-on. The. next. screen. allows. you. to. enable. or. packages.are.installed.successfully. disable.the.installed.add-on.packages. Click.Next.to.continue. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 39: Wizard.complete

    If you did not use the wizard to map the drives, you can manually map or access the created volumes through your computers operating system. Detailed conigurations using the Web UI is explained in the coniguration section of this manual. The.ShareCenter.Setup.Wizard.is.complete.. Click.Finish.to.exit.the.wizard.and.start.using. your.DNS-345.NAS. Click.Next.to.continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 40: Mapping.a.drive

    Section 2 - Getting Started Mapping a Drive Click. Start,. then. Computer. (the. name. of. This.screen.shows.some.details.on.selecting. your.computer).. a.network.drive. On.the.right-side.panel.is.a.list.of.your.hard. Click.Browse.to.ind.your.network. drives,. removable. storage. ,. and. network. locations.. If. you. do. not. have. any. network. locations,.this.may.be.the.irst.time.you.set. up.a.network.drive..Begin.by.clicking.on.‘Map network drive’. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 41

    Section 2 - Getting Started Windows.will.automatically.detect.all.devices. Click.on.your.NAS.to.see.the.volumes.you. on.your.network.including.your.DNS-345. created. earlier.. Then. select.the. volume. that.you.wish.to.access.and.click.OK. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 42

    Section 2 - Getting Started After. selecting. your. volume,. click. Finish The.drive.will.then.appear.in.your.Windows. proceed. Explorer. in. green.. This. means. the. drive. is. active.and.ready.for.use.. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 43

    Section 2 - Getting Started Part II D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 44

    Applications FTP/HTTP.Downloads Conigure remote backup services Remote.Backup Conigures local backups, Time Machine settings and USB backups Local.Backups © Conigure your P2P downloads and control your download schedules P2P.Downloads Web.File.Server Create,.conigure,.and.manage.your.web.ile.server.settings Amazon.S3 Create,.modify,.and.delete.your.Amazon.S3 .settings © D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 45: Coniguration - Web Ui Login

    Coniguration - Web UI Login To manage and access your ShareCenter Quattro DNS-345, open a web browser from our Systems Requirements list, type in the IP address of your NAS, and login. When you were coniguring your DNS-345, you set up your LAN settings.

  • Page 46: Web.ui.general.layout

    After logging in, the ShareCenter web UI will navigate you to the ‘My Favorites’ tab by default. You will see the Applications and Management tabs alongside of it. You will ind the coniguration icons in the Management tab. The My Favorites screen D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 47

    Section 4 - Coniguration Applications screen D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 48

    Section 4 - Coniguration Management screen D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 49: Management

    Section 4 - Coniguration Management Status icons. Click on each of the icons to see the submenus. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 50: Setup.wizard.(web.ui)

    The ShareCenter Quattro has a System Wizard that allows you to quickly conigure some of the basic device settings. Click the System Wizard icon to start the Setup Wizard. Click the Run Wizard button to start the setup wizard. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 51

    Click Next to continue. Set the timezone to the appropriate geographical zone closest to your location from the drop-down menu. Click Next to continue. Click Skip to ignore these settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 52

    Click Next to continue. The ShareCenter LAN 2 parameters can either use DHCP to obtain its IP settings dynamically or Static to set them manually in the parameters below. Click Skip to ignore these settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 53

    The e-mail account will then receive Event Alerts from the ShareCenter. Click Anonymous to create a random account with no speciic settings. Click Skip to ignore these settings. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 54

    Click the Previous button to go back and heck your settings. If you are satisied with the settings, click the Finish button to save and continue. Click Exit to end the wizard without saving the settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 55: Disk.management

    RAID 1-5 functionality then you can Rebuild check this option. Note: You can still rebuild a drive using the RAID 1-5 functionality however you must initiate the rebuild manually. Rebuild Now Rebuild option by clicking this button. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 56: Hard.drive.coniguration.wizard

    R A I D c o n f i g u r a t i o n u n d e r ‘Current RAID Type’. The options below provide other choices. 1. Set RAID type and Re-Format 2. Conigure Newly Inserted Hard Drive(s) Click ‘Set RAID Type and Re-Format’ D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 57

    Click Next to continue. The ‘Select a RAID Type’ page gives you six different RAID options to configure your hard drives. Select the type you wish to use. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 58

    Section 4 - Coniguration Select Standard to create separate volumes for each individual drive. Click Next to continue. Choose a volume or volumes that you would like to encrypt. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 59

    Click Next to continue. The ‘Volume Configuration Summary’ shows details on all of the conigured drives. Check the details on the list and click Format to continue or click Previous to make changes. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 60

    Click Next to continue. Partitioning will now begin. Please be patient while this process takes place. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 61

    If you would like to change your settings at this stage, click Exit. The system will now update all of the changes made. Please be patient during this process. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 62

    The wizard is now complete. It will show the volume number(s), ile system selected, the type of RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-345. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 63: Jbod

    Section 4 - Coniguration JBOD Select JBOD to create a single volume from all of the drives. Click Next to continue. Choose a volume or volumes that you would like to encrypt. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 64

    Click Format to continue or Previous make changes. If you are encrypting the volume, select Auto Mount, enter a password, and conirm the password. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 65

    The ‘Volume Configuration Summary’ shows details on all of the conigured drives. Check the details on the list and click Format to continue or click Previous to make changes. ShareCenter will now prepare the volume for partitioning. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 66

    A graphical bar will show the volume being formatted. Please be patient during this process. Do not turn off your NAS during this process. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 67

    The wizard is now complete. It will show the volume number(s), ile system selected, the type of RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-345. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 68: Raid.0

    Select a capacity for RAID 0 (in GB) then check the box next to ‘Conigure the remaining disk space as JBOD’ if you wish to conigure the remaining space as JBOD. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 69

    Click Next to continue. The ‘Volume Configuration Summary’ shows details on all of the conigured drives. Check the details on the list and click Format to continue or click Previous to make changes. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 70

    Click Next to continue. Partitioning will now begin. Please be patient while this process takes place. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 71

    If you would like to change your settings at this stage, click Exit. The system will now update all of the changes made. Please be patient during this process. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 72

    The wizard is now complete. It will show the volume number(s), ile system selected, the type of RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-345. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 73: Raid.1

    Select RAID 1. All the drives are striped. Click Next to continue. Enter the amount of disk space you would like to assign to the irst volume for RAID 1. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 74

    Enter the amount of disk space you would like to assign to the second volume for RAID 1. Click Next to continue. Click Enable Auto-rebuild to ix a RAID if it becomes corrupted. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 75

    Section 4 - Coniguration Choose a volume or volumes that you would like to encrypt. Click Next to continue. A warning message will appear, stating that your device will have some latency. Click Yes to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 76

    Enter a password and conirm it. Click Next to continue. The ‘Volume Configuration Summary’ shows details on all of the conigured drives. Check the details on the list and click Format to continue or click Previous to make changes. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 77

    The next window will ask you to conirm your drive selection. Click Yes to agree. Click No to exit. Partitioning will now begin. Please be patient while this process takes place. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 78

    If you would like to change your settings at this stage, click Exit. ShareCenter will format the second drive of the volume as well If you would like to change your settings at this stage, click Exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 79

    The wizard is now complete. It will show the volume number(s), ile system selected, the type of RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-345. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 80

    Section 4 - Coniguration Once you have completed the wizard. ShareCenter will return to the main screen. The RAID configuration you just set will be displayed. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 81: Raid.5

    Select a capacity for RAID 5 (in GB) then check the box next to ‘Conigure the remaining disk space as JBOD’ if you wish to conigure the remaining space as JBOD. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 82

    Section 4 - Coniguration Click Enable Auto-rebuild to ix a RAID if it becomes corrupted. Click Next to continue. Choose a volume or volumes that you would like to encrypt. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 83

    A warning message will appear, stating that your device will have some latency. Click Next to continue. Select Auto Mount to conigure the volume to mount when the device becomes active. Enter a password and conirm it. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 84

    Format to continue or click Previous to make changes. Click Next to continue. The next window asks you to conirm your selection to format the drives. Click Yes to agree. Click No to exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 85

    A graphical bar will show the volume being formatted. Please be patient during this process. Do not turn off your NAS during this process. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 86

    Section 4 - Coniguration The system will now update all of the changes made. ShareCenter will format the second drive of the volume too. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 87

    Section 4 - Coniguration Once you have completed the wizard. ShareCenter will return to the main screen. The RAID configuration you just set will be displayed. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 88: Raid.5.+.spare

    Table of Contents RAID 5 + Spare Select RAID 5. All the drives are striped. Click Next to continue. Click Create Spare Disk. This creates a RAID 5 plus the spare. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 89

    The volume is now conigured for RAID 5 plus the spare. Click Next to continue. Choose a volume or volumes that you would like to encrypt. A warning message will warn you that the system will operate slower. Click Yes to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 90

    ShareCenter will now show the Volume Coniguration Summary. Make sure under type it reads RAID5 + Spare. Check the details on the list and click Format to continue or click Previous to make changes. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 91

    The next window asks you to conirm your selection to format the drives. Click Yes to agree. Click No to exit. Partitioning will now begin. Please be patient while this process takes place. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 92

    If you would like to change your settings at this stage, click Exit. The system will now update all of the changes made. Please be patient during this process. Do not turn off your NAS during this process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 93

    RAID, and the disk formation in the RAID. Click Finish to continue. Once you have completed the wizard. ShareCenter will return to the main screen. The RAID configuration you just set will be displayed. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 94: Raid.10

    Select a capacity for RAID 10 (in GB) then check the box next to ‘Conigure the remaining disk space as JBOD’ if you wish to conigure the remaining space as JBOD. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 95

    Section 4 - Coniguration Click Enable Auto-rebuild to repair a RAID if it becomes corrupted. Click Next to continue. Choose a volume or volumes that you would like to encrypt. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 96

    A warning message will warn you that the system will operate slower. Click Next to continue. Select Auto Mount to conigure the volume to mount when the device becomes active. Enter a password and conirm it. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 97

    Format to continue or click Previous to make changes. A warning message will appear to inform you that all volumes and data will be formatted and erased. Click Yes to continue. Click No to exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 98

    A graphical bar will show the volume being formatted. Please be patient during this process. Do not turn off your NAS during this process. If you would like to change your settings at this stage, click Exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 99

    The wizard is now complete. It will show the volume number(s), ile system selected, the type of RAID, and the disk formation in the RAID. Click Finish to complete the process and start using your DNS-345. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 100

    Section 4 - Coniguration Once you have completed the wizard. ShareCenter will return to the main screen. The RAID configuration you just set will be displayed. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 101: A.quick.s.m.a.r.t..test

    Quick Test radio button and click Start. A warning message will prompt you to stop all services and network activity. Click Yes to continue the Quick S.M.A.R.T. test. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 102

    Progress Tab. The Start button will change to a Stop button. Stop Button Progress Tab When the test is complete, the results will be displayed under the Results Tab. Results Tab D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 103: Creating.a.schedule.for.the.s.m.a.r.t.test

    Click Create To view the Schedule List, click on the schedule list arrow. A new table will appear showing details of the new schedule created. To delete a scheudle, click on the Trash Can. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 104: Scanning.the.volumes

    ShareCenter Quattro. Scan Disk scans your disks ile system for errors and/or corruption. Click Management, then Disk Management, and then Scan Disk. Select the volume from the drop-down list you wish to scan. Click Scan Disk D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 105

    The DNS-345 will initialize the volume(s) and begin scanning. Please wait while the software scans your machine or click Exit to cancel the scan. When the scan is complete, the table will either display Success or Failure. Click Finish to exit. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 106: Volume.encryption

    Next, you will be prompted to conigure the drive. Select Auto Mount if you wish to setup encryption when the NAS starts up. Enter a password, then conirm it and click Next to continue. ..NB:.Please.take.note.that.once.you.enable.volume.encryption.throughput.will.be.much.slower. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 107

    If the passwords do not match then a message will appear. Click Yes, to re-enter the matching passwords. The Volume Coniguration Summary shows which volumes are encrypted and which ones are not. Click Format to start the formatting process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 108

    Section 4 - Coniguration A message will appear asking you to conirm your hard drive selection for formatting. Click Yes to start the formatting process. Please be patient as the partitioning and formatting process begins. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 109

    Click Finish to close this window. Go to Disk Management, Volume Encryption to see a list of encrypted volumes. Select the volume(s) you wish to modify. Your selection(s) will turn Click Modify. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 110

    Enter the password into the ield provided and click Apply. You have the option to enable Auto Mount and enter a new password. If you choose not to enable Auto Mount you can leave this ield blank. Click Apply to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 111

    Please be patient while this process takes place. Do not turn off your NAS during this process. The wizard will return you to the Volume Encryption page where you can view the encrypted volumes. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 112: Account.management.-.creating.single.users

    However access rules can be created and edited in the Network Shares menu. Click Management, Account Management. Under Users/Groups, User Settings click Create The User Setup Wizard will appear. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 113

    Section 4 - Coniguration In Step 1, select ‘Create a Single User’ Click Next In Step 2, enter the user name and password for the new user. Click Next to continue D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 114

    In Step 3, add the user to a group by entering the group details. (If no group exists click Next) Click Next to continue. In Step 4, select the network share settings. Select Read Only, Read/Write, or Deny Access. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 115

    Section 4 - Coniguration Assign Privileges/Access Methods for the user(s). Check the options you need. Click Next to continue. WebDAV is one of the options. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 116

    Click Next to continue. The inal step is a summary of all the conigurations you made. Click Finish to accept the changes. Click Exit to cancel the changes. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 117: Account.management.-.creating.multiple.users

    Enter the amount of users you want to create. Next to the input ield is the remaining amount of users you can add to the NAS. Enter a password and conirm it. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 118

    In Step 3, add the user to a group by entering the group details.(If no group exists click Next) Click Next to continue. In Step 4, select the network share settings. Select Read Only, Read/Write, or Deny Access. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 119

    Click Next to continue. In Step 5, enter the amount of disk space you wish to assign the user on each volume. Type 0 to provide unlimited disk space to the user. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 120

    The inal step is a summary of all the conigurations you made. Click Finish to accept the changes. Click Exit to cancel the changes. The User Settings window will show a list of the users created. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 121: Account.management.-.creating.the.same.user

    Section 4 - Coniguration Account Management - Creating the same user Click Management, Account Management. Under Users/Groups, User Settings click Create The User Setup Wizard will appear. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 122

    In Step 1, select ‘Create a Single User’ Click Next If you have created the same user twice, a message will appear prompting you to enter a new username. Click Yes and enter a new username. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 123: Account.management.-.modify.users

    Section 4 - Coniguration Account Management - Modify Users Click the user you wish to modify. The user will be highlighted in red. Click Modify to continue. The User Setup Wizard will appear. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 124

    Section 4 - Coniguration In Step 1, change the username or password. Click Next to continue Change the Network Share Settings accordingly. Click Next to continue D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 125

    Click Next to continue. In Step 4, enter the re-assigned amount of disk space you wish to assign the user on each volume. Type 0 to provide unlimited disk space to the user. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 126

    The inal step is a summary of all the conigurations you made. Click Finish to accept the changes. Click Exit to cancel the changes. A message will appear stating the user details have been changed successfully. Click Yes to exit the wizard. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 127: Account.management.-.deleting.users

    Click the user you wish to delete. The user will be highlighted in red. Click Delete to continue. A message will appear prompting you to conirm deleting the user. Click Yes to conirm. The user is now automatically removed from the list. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 128: Account.management.-.importing.users

    Section 4 - Coniguration Account Management - Importing Users Click Account Management, Users/Groups Click Import Users The Import Users Wizard will start. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 129

    In Step 1, click Download to see a sample ile. Click Overwrite Duplicate Accounts if this is necessary Click Choose File to import the list. Click Next to continue Assign the privileges and access methods. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 130

    If there are problems with the user list, the wizard will show the errors in red on the table. The Summary will show a list of imported users. Click Finish to close the wizard or go back to change the import ile. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 131: Account.management.-.creating.a.group

    Account Management - Creating a Group Click Account Management, Users/Groups Click the blue arrow and the Group Settings will appear. Click New to create a new Group. The Group Setup Wizard will now start. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 132

    Section 4 - Coniguration In Step 1, enter a Group Name. Click Next to continue In Step 2, click the checkbox to select the user(s) you wish to add to the group. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 133

    Click Next to continue. Select the Assigned Privileges for the group. The greyed out selections are there by default. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 134

    Select the appropriate WebDAV settings. Click Next to continue. Enter the amount of space you want to assign to the group for each volume. Enter zero to give unlimited disk space to the group. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 135

    The wizard is now complete. The last step shows a summary of the group you created. Click Previous to change your settings or Finish to end the wizard. Under Group Settings, a table will show the group you just created. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 136: Account.management.-.modifying.a.group

    Click Account Management, Users/Groups Click the blue arrow and the Group Settings table will appear. Select the group you want to modify. Your selection will turn red. Click Modify to change the settings for the Group. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 137

    Section 4 - Coniguration The Group Setup Wizard will now start. Click Next to continue. In Step 1, make the necessary modiications to the group(s). Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 138

    Click Next to continue. Select the appropriate Assigned Privileges to the group. The greyed out selections are there by default and cannot be modiied. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 139

    Enter zero to give unlimited disk space to the group. Click Next to continue. When editing the quota, make sure the size is not smaller than the user quota on his/her account. Click Yes to change the quota. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 140

    The wizard is now complete and will show a summary of the group you edited. Click Previous to change your settings or Finish to end the wizard. Exit will cancel all changes you made. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 141: Account.management.-.deleting.a.group

    Select the Group you want to delete. Click Delete. A warning message will appear asking you to verify if you want to delete the Group. Click Yes to delete the Group. Click No to cancel your decision. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 142: Quota.settings

    Click Enable to activate Quota Settings. The status will now display ‘Started’, notifying you that the Quota Settings have begun. To Modify a User’s Quota Settings, click the blue arrow to reveal a table of users. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 143

    Select the User. Your selection will turn red. Click Modify to change his/her settings. The Quota Settings coniguration box will display the user account you want to modify. Enter a new volume quota amount. Click Apply to conirm your settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 144

    Section 4 - Coniguration The modiied quota settings will be displayed in the table. For Group Quota Settings, click the blue drop down arrow to view the group quota table. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 145

    Select the group. Your selection will turn red. Click Modify. The Group Quota Settings screen will display the group you want to modify. Enter the new quota volume settings for the current group. Click Apply. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 146

    Section 4 - Coniguration The table under the Group Quota Settings window will display the modiied quota settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 147: Network.shares

    At the bottom of the table, the user can navigate through pages and also refresh the window by click on the Refresh button. Click on the Reset Network Shares button to reset the network access list to the default coniguration, D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 148: Adding/modifying.new.network.shares Wizard

    2) Conigure shared folder access rights. 3) Conigure network access settings. 4) View a summary of the coniguration before completing. Click Next to continue. Select the Share Folder from one of the volumes. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 149

    Select the appropriate access rights for the share. Options to choose from are Read Only, Read/Write, and Deny Access. This procedure can also be used to block certain users from accessing certain folders. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 150

    User conigured on the ShareCenter Click Next to continue. If you selected speciic user/group in Step 2 then this step allows you to set the access rights for each Group conigured on the ShareCenter. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 151

    No (off) when using ile-based database applications. When enabled, the ile attribute “Map Archive” will be copied as the ile is being stored on the ShareCenter Quattro. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 152

    AFP is short for Apple Filing Protocol. • FTP is short for File Transfer Protocol • NFS is short for Network File System. • WebDAV is short for Web-based Distributed Authoring and Versioning. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 153

    Root Squash - Disables writing to the Root owned directories and iles on the system when the user has root access privileges. • Write - provide write permission to the ile system. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 154

    Step 3, then this step will allow you to set the access parameters. Click Next to continue. Here a summary of the created shares will be displayed. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 155: Deleting.a.network.share

    Deleting a Network Share Your selection will turn red. Click Delete. A warning message will appear prompting you to verify if you wish to delete te Share. Click Yes to delete. Click No to Cancel. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 156

    Section 4 - Coniguration Network Share List. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 157: Resetting.the.network.shares

    Section 4 - Coniguration Resetting the Network Shares Reset Network Shares button. A warning message will prompt you to conirm your selection. Click Yes to conirm. Click No to cancel. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 158: Adding.new.iso.mount.shares.wizard

    Click Next to continue. Expand one of your Volume File System trees to select the desired .iso ile. Check the box to the left of the .iso ile to select Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 159

    The user can assign Read Only or Deny Access privileges to the ISO Mount share here. Click on the appropriate radio button for the privileges you would like to assign. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 160

    AFP is short for Apple Filing Protocol. • FTP is short for File Transfer Protocol • NFS is short for Network File System. • WebDAV is short for Web-based Distributed Authoring and Versioning. • Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 161

    Click on the Finish button to accept the change and complete the wizard. Through the D-Link Storage Utility, the ISO Mount Share can now be mapped to your computer as a normal network share.

  • Page 162

    Username and Password settings. Enter a new Username Type the original Password Enter a New Password Conirm the New Password Click Save Settings to accept the changes Click Don’t Save Settings to cancel changes D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 163: Active.directory.settings

    Enter the DNS 1 and/or DNS 2 IP addresses. Enter a Workgroup if required. Enter a Real Name. Enter an Active Directory Server name. Click Save Settings to connect to the Active Directory. Click Don’t Save Settings to cancel. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 164: Distributed.file.system

    Section 4 - Coniguration Distributed File System Click Account Management,then Distributed File System. Check the Enable Distributed File System box. A new table list will appear called the Root Folder List. Note:.For.Administrators.-.Setup.a.username.and.password.identical.to.each.PC.connected.to.the.NAS.for.DFS.to.work.. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 165

    You will be prompted to enter a Root Folder Name in the ield. Click Apply. The Root Folder List will now show the new root folder name and provide options to Modify, Delete, or Conig Link. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 166

    To modify a folder within the list, click Modify. Enter a new folder name and click Apply. The modiied name will be shown in the table. To delete the folder list just click Delete. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 167

    Click New to conigure it. The Distributed File System Settings box will appear. Enter a Local Share Name Enter the Host IP address Enter the Remote Share Folder or click Get Remote Share Folder and click Apply D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 168

    Click Yes to enter the remote share folder manually. Once you have entered the correct details, the local share is created, displaying the host IP and remote share folder address. To delete a remote folder click the delete button. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 169: Network.management

    The network load is balanced across all links. Go to Network Management, then LAN Setup. Select the LAN port you wish to conigure. Your selection will turn red. Click Setup. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 170

    IP settings and VLAN settings. Click Next to continue. Step 1 allows you conigure your LAN settings. Here you can choose between DHCP settings or you can manually conigure your own LAN. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 171

    Select the Enable radio button to enable VLAN or click the Disable radio button to disable VLAN. Enter a VLAN identiication number and click Next. Step 3 shows a summary of what you just conigured. Click Finish to exit the wizard. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 172

    Click OK, then logout and log back in to allow the changes to take effect. The wizard combined both LAN ports under one coniguration group. Aggregation termiinology under the help ile. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 173

    Section 4 - Coniguration The basic LAN Setup also includes Link Speed Settings and LLTD Settings. Choose the option that suits your needs and click Save Settings to continue. Note:.Link.aggregation,.or.IEEE.802.3ad,.is.a.computer.networking.term.which.describes.using.multiple.Ethernet.network. cables/ports.in.parallel.to.increase.the.link.speed.beyond.the.limits.of.any.one.single.cable.or.port,.and.to.increase.the. redundancy.for.higher.availability..Link.aggregation.is.an.inexpensive.way.to.set.up.a.high-speed.backbone.network. that.transfers.much.more.data.than.any.one.single.port.or.device.can.deliver..Link.aggregation.also.allows.the.network’s. backbone.speed.to.grow.incrementally.as.demand.on.the.network.increases,.without.having.to.replace.everything.and. buy.new.hardware..The.ShareCenter.Quattro.DNS-345.provides.this.feature.to.better.enable.the.network.it’s.on..Apply. various.link.aggregation.options.that.warrant.support.for.your.network. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 174: Network.management.-.ddns

    Go to Network Management, then Dynamic DNS. Click Enable to select Dynamic DNS, then from the drop-down list select the server, enter the Host Name, username, password, verify the password, and click Save Settings. .dlinkddns.com/howto. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 175: Detection

    Login and select Network Management, then click the blue button to reveal the UPnP router settings. Click Test to run a search. The DNS-345 is searching for a router. Do not turn off your NAS. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 176

    Section 4 - Coniguration A message will notify you that the wizard has found a UPnP router on the network. Click the blue arrow to reveal the Port Forwarding options. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 177: Network.management.-.port.forwarding

    Section 4 - Coniguration Network Management - Port Forwarding Login and select Network Management, then click the blue arrow to reveal Port Forwarding settings. Click Add. The Port Forwarding wizard will starts. Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 178

    Click Next to continue. Select the default service you wish to Port Forward. Note: You can select more than one port. Click Previous to change the Port Forward Rule or Finish to end the wizard. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 179: Application.management.-.ftp.server

    Select a default port range or select a passive mode type Select a language Select the correct low control Click to enable SSL/TLS and click Enable FXP to continue Click Save Settings to save the changes. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 180

    Enter the IP address of a machine you wish to block. Select permanent if you wish to block the IP address permanently or Temporary if you wish to set a time frame. If your choice is permanent, click Apply and continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 181

    Section 4 - Coniguration If your choice was Temporary, then you need to select a blocked time frame. Click Apply to continue. The Blocked IP list will display the IP addresses you blocked. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 182

    Section 4 - Coniguration Click the blue arrow next to FTP server status to reveal the FTP details. The FTP server is stopped by default. Click Start FTP server to run the process. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 183: Upnp.server

    Click Application Management, then UPnP server. Click the Enable radio button to enable the UPnP server. Click Add to conigure the UPnP share. Select the volume you like to share and click Apply. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 184

    Section 4 - Coniguration The system will not build the media library. When the system has inished building the media library, a sucess message will appear. Click Yes to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 185

    Section 4 - Coniguration The selected volume will appear in the table under the UPnP server. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 186: Itunes.server

    ShareCenter, launch iTunes. In your iTunes utility, select the ShareCenter and enter the iTunes server password if required. Select the ShareCenter. When prompted, enter in the iTunes server password. Media stored on the ShareCenter will then be available for use in iTunes. Click OK. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 187: Add.ons

    Section 4 - Coniguration Add Ons . The Add on software is available from the D-Link website in your country and some of them are available from the Installation Wizard. Below is a list of some of the supported Add-ons available.

  • Page 188

    Once the path of the package has been located, click Apply to add the package. Under Add-ons, a red message will appear to show that the installation of the package was successful. Click the Start button under Start/Stop. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 189

    WordPress can be accessed and commented on from any internet connection. urn your ShareCenter into an Internet Streaming Music Streamer site. From your ShareCenter, the Audio Streamer add-on can transmit multiple streams of playing music iles to any internet connection. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 190: Afp.and.nfs.services

    Click the Enable radio button to turn AFP services Click Save Settings to save the AFP services. Click Application Management, then NFS Service. Click the Enable radio button to turn NFS services Click Save Settings to save the NFS service. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 191: System.management.-.language

    Click Choose File Browse your computer hard drive for the selected pack and click Apply. If you have not selected a language package, a message will prompt you to locate one. Click Yes to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 192: System.management.-.time.and.date

    NTP (Network Time Protocol) Server in order to periodically update your system time from the NTP Server. You can also use the time and date of your compute as the system time. Click System Management, then Time and Date. Select the Set Time from My Computer button. A conirmation message will appear. Select the time zone. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 193

    Section 4 - Coniguration Select the NTP server. Click Save Settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 194: System.management.-.device

    URL section of your web browser. For example: http://dlink-d10001 Click System Management, then Device. Enter a Workgroup. Enter a Name. Enter a Description. Click Save Settings to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 195: System.management.-.system.settings

    Type in the inactive time and click save settings. Under System Temperature Threshold, click the blue arrow to view the temperature settings. Change the settings according to your needs and click Save Settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 196: System.management.-.power.management

    Click Enable to enable hard drive hibernation. Then from the drop-down list select a time frame. Click the blue arrow to reveal Power Recovery. Select Enable to use Power Recovery. Click Save Settings to continue D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 197

    Select a type of control settings Click Save Settings to continue. Click the blue arrow to reveal Power On/Off Schedule Settings Click Enable and choose the day and time for the schedule. Click Save Settings to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 198

    Section 4 - Coniguration Click the blue arrow to reveal OLED Display Settings Click Enable to Display the OLED for a speciic time period. Click Save Settings to continue D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 199: System.management.-.notiications

    E-mail Settings Create an account by entering your e-mail details. Click Save Settings to continue Click System Management, then Notiications, and then SMS Settings. Follow the instructions on the wizard. Click Next to proceed D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 200

    Section 4 - Coniguration Step 1 Enter your SMS provider details. Click Next to continue. Click Save Settings to proceed. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 201

    Section 4 - Coniguration Click System Management, then Notiications, and then Event Settings. Select the events you wish to enable. Click Save Settings to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 202: System.management.-.logs

    SysLog server. You can also view the NAS system logs and the FTP logs here. Click System Management, then Logs Click the blue arrow to reveal the Server Settings Click Enable Syslog Enter an IP address Click Save Settings. Click the blue arrow to reveal the Logs D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 203: System.management.-.firmware.upgrade

    Section 4 - Coniguration System Management - Firmware Upgrade D-Link support website. If new irmware is available, download the ile to your local computer. Click System Management, then Firmware Upgrade Click the blue arrow to reveal the current irmware version.

  • Page 204: System.management.-.snmp

    Section 4 - Coniguration System Management - SNMP Click System Management, then SNMP Click Enable to activate SNMP. Enter the SNMP community details. Enable notiications and specify the IP address. Click Save Settings to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 205: System.management.-.usb.devices

    Enter an IP address and click Save Settings. The UPS Status will show the current status of your UPS. Click the blue arrow to reveal the USB storage Information. It displays information on the manufacturer, product name, and size(capacity). D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 206

    Section 4 - Coniguration Click the blue arrow to reveal Printer Information. It displays information on the manufacturer, product type, and connection details. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 207: System.status.-.system.info

    Click the blue arrow from each of the headings to reveal information on each segment. LAN Information, Device Information, and Volume Information. Click System Status, then Hard Drive Info Click the blue arrow to reveal a table of hard drive information. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 208

    Section 4 - Coniguration Click the blue arrow to reveal the Resource Monitoring details. The monitor provides information on the CPU, memory, bandwidth, and processes in action. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 209: Part Iii

    Section 4 - Coniguration Part III D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 210: Applications

    Click on Test to verify access to the site address and ile/folder. If you have chosen File from the above drop down list, you must specify the exact ile in the URL path, including the ile extension. (e.g. http://example.com/test/ testile.txt). D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 211

    Current download statistics, such as % completed and download speed, are displayed for each event. List A refresh button is also provided to produce updated listings at any time. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 212

    Select HTTP by clicking on the radio button. Enter a URL. Click Test to test the URL. Under Save To, click the Browse button to save your HTTP iles. Enter (optional) details under Rename. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 213

    Click Test to test the URL. The test results will either show pass or fail. Click Close to proceed. Select a date and time for the download settings Select a recurring backup time frame. Click Save Setting to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 214

    Section 4 - Coniguration The table below will show the HTTP downloads. To edit an item, select it irst then click Modify. To delete an item, select it irst then click on the Delete button. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 215: Applications.-.ftp.downloads

    Enter a username, password. Select a type Enter a URL Browse to a location to save iles to. Select the Language and Scheduling Click Save Settings. The table below will now show the FTP path and status. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 216

    For Anonymous settings: Click the Anonymous radio button and follow the rest of step 1. Since the Login Method is Anonymous, the username and password sections are greyed out. Click Save Settings once complete. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 217: Remote.backups

    Backup jobs in the Remote Backup list. You must select the remote backup job irst and then click the modify button. o remove a Remote Backup job select the job in the list and then click the Delete button. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 218

    NAS or Linux ile system. Remote To Local: sets the backup source as the remote NAS or Linux ile system and the target destination for the backup iles as the local NAS. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 219

    The subsequent backups in the incremental series contain new iles and folders plus the links to the irst incremental backup. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 220

    Once - select this option to run the Remote Backup once at a speciic date and time set here. Scheduled: select this option to set the backup to occur daily, weekly, monthly per a speciic schedule. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 221

    Refresh Button: Click this button during a backup or Backup now : Clicking this button will execute the backup recovery process to monitor the progress by updating the job immediately as long as the job is enabled. progress completed bar. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 222: Local.backups

    Checking Incremental Backup will have the ShareCenter , or click Quattro compare identical ile names at the source and Browse to select the destination. destination. Files will only be overwritten if the source ile is more recent. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 223: Local.backups.-.time.machine

    MAC OS X Time Machine. The Time Machine Settings list will appear when this checkbox is ticked. Machine associated with the Time Machine backup. Settings list ime Machine destination. ime Machine destination. Network Machine Destinations. Shares D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 224: Local.backups.-.usb.backups

    The main beneit to using MTP backups is that there is no need for drivers. The protocol resides on the NAS and all conigurations take place between your NAS and the portable device. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 225

    All iles in this volume now support MTP. Under USB Backups click the Enable radio button Under Category, select your USB backup format, USB to NAS or NAS to USB. Clock Browse to locate your source. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 226

    Section 4 - Coniguration Under Source, select the path where you want to backup. Click Apply to continue. Click Browse to ind the destination. Select the path or USB device for your backup. Click Apply to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 227

    Section 4 - Coniguration Select the Type you wish to copy Click Save Settings. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 228: Usb.print.server

    Section 4 - Coniguration USB Print Server The.ShareCenter.features.a.built-in.USB.print.server,.giving.users.the.ability.to.share.a.printer.on.their.local.network.. . Connect.a.USB.printer.to.the.USB.port.on.the.back.of.the.ShareCenter..It.is.important.to.ensure.that.the.printer’s.drivers. are.already.installed.on.any.computer.you.want.to.print.from. Adding.a.Printer: Click Start and select Printers and Faxes. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 229

    Section 4 - Coniguration Select Add a printer. The.Windows .Add.Printer.Wizard.will.launch: ® Click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 230

    When prompted to choose a local, or network printer, select “A network printer, or a printer attached to another computer.” Click Next to continue. Select “Browse for a printer” and click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 231

    Section 4 - Coniguration Select Double-click DNS-345 from the Shared Printers list to expand the tree. Select the available USB printer, and click Next to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 232

    Click OK to continue and select a printer driver. Select the appropriate printer driver from the list and click OK to complete the wizard. If the driver is not in the list, select Have Disk. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 233

    Section 4 - Coniguration Insert the print driver CD or browse to the appropriate directory. Select the appropriate driver ile, and click Open to continue. Click OK to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 234

    Section 4 - Coniguration Verify the driver is correct, and click OK to continue. The wizard will install the printer drivers, and return a completion screen. Click Finish. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 235

    Section 4 - Coniguration The printer should now appear as an available printer. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 236: P2p.downloads.-.settings

    Path yption used. Control choose the bandwidth control speed, or you can manually conigure the maximum download rate and maximum upload rate. Enter the value -1 to set the respective ield to unlimited. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 237: P2p.downloads.-.downloads

    Delete button allows the user to remove a selected download. This will remove not only the torrent ile, but also the partially downloaded iles too. Start and Stop buttons allow users to start and stop selected P2P downloads in the task list. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 238: Web.file.server

    Copies the ile to the clipboard and opens a wizard to allow you to select the folder to paste the ile into. Once you have chosen the folder clicking OK to paste the ile into the folder. rights, and modify time. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 239: Amazon.s3

    NAS in the cloud. Data can be stored and retrieved through a simple web interface from your NAS. Stored objects cannot be larger than 5GBs, but users can store an unlimited amount of objects. All objects are retrievable with a unique key code assigned to each user. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 240: Photo.center

    Photo Center is an Add-On tool for photos. You can create individual albums, group albums, Gallery’s, and etc. This application is managed and placed on your DNS-345 from the Applications window. Login to your ShareCenter Click Management, then click Application Management. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 241

    Section 1 - Product Overview Click Add Ons Then click Choose File to ind the Photo Center Application on your computer. Browse through your computer to ind the folder for the application. Click Open. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 242

    The File Path has now been set. Click Apply to continue. Photo Center is now installed on the NAS. Below File Path it should read Install Successfully. In the table, you will see the Photo Center application listed. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 243

    Section 1 - Product Overview Click the green arrow under Start/Stop to activate the application. Return to the Application window. Photo Center will now appear under the Enabled Add-Ons section. Click Photo Center to launch the application. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 244

    The application will now open in a new tab in your browser. The program is ready to create a Gallery in the following manners: Add Albums Add Comments Add Items Edit Albums Edit Permissions D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 245: My.favorites

    The My Favorites tab allows you to add any icon you routinely access from the Applications or Management Tab in one convenient location for quick and easy access. You can add icons to the My Favorites tab using two different methods. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 246: Add.an.icon.to.my.favorites

    Click and hold the left mouse button down over the icon and drag it over to the My Favorites tab. You will see a white arrow pointing to the My Favorites tab while you are dragging the icon. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 247: Removing.an.icon.from.my.favorites

    Icon from the My Favorites tab, simply right click on it and select Remove From My Favorite in the context selection that appears. Right click an Icon in the My Favorites tab and select the Remove From My Favorite option. The Icon alias should disappear from the My Favorites tab view. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 248: Knowledge Base

    Because the data is stored on multiple disks, tolerance means that if one drive fails, all data in the array RAID 1 provides fault tolerance and protection, in addition to will be lost. performance advantages. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 249

    240GB (3x80GB). Implementing RAID 5 on the ShareCenter Pro allows it to continue operating even if one of the disks fails. The diagram below indicates the operation of RAID 5: D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 250: Raid.options

    As a result, RAID 0 striped sets can provide a dynamic increase in disk performance. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 251

    RAID 5 array can enter a data recovery mode, where the parity data in the array is used to rebuild the missing data on the newly installed drive. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 252

    This ensures that if any single drive in the RAID 10 array fails, the data is not lost. RAID 10 requires a minimum of four drives and can be expanded in pairs. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 253: Raid.comparison.chart

    1 Disk per mirrored Combination of RAID Highest data High redundancy stripe 0 (data striping) and protection, can cost because all RAID 1 (mirroring) tolerate multiple data is duplicated, drive failures. twice the storage capacity is required. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 254

    ShareCenter™. It is important to ensure that the printer’s drivers are already installed or available on any computer you want to print from. Note: Only Printer function is supported. The ShareCenter does not support the copy and scan functions of Multi-Function Printers. Log into ShareCenter D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 255

    Section 5 - Knowledge Base Click Management Click System Management, then USB Devices. Click the blue arrow to view the Printer Information. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 256

    The.Windows .Add.Printer.Wizard.will.launch: ® Select the printer driver from the installed Manufacturer list or use the Have Disk button to browse for the printer driver ile. Click OK to continue. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 257

    Section 5 - Knowledge Base Once you have selected the proper driver as shown in the browse list then click OK to install the printer. The printer is now installed and the printer queue will appear. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 258: Ups.connectivity

    Section 5 - Knowledge Base UPS Connectivity vice, giving users the ability to share the UPS on their local network. Connect a UPS to the USB port on the back of the ShareCenter™. Log into ShareCenter D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 259

    Click System Management, then USB Devices. Click the blue arrow next to UPS Settings. There are two modes, Standalone and Master. The UPS Status screen shows the mode, manufacturer, product type, battery charge meter, and status D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 260

    Click Add Enter the IP address of the other NAS on the network. Click the ‘+’ button to add more IP addresses. If you do not add an IP address a message will appear. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 261

    Section 5 - Knowledge Base The message will asks you to enter an IP address. Click Yes to continue. Once you have entered an IP address, the system will check its database for IP address records. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 262

    Section 5 - Knowledge Base The UPS Settings table will display the IP address(es) you added. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 263: Deleting.a.ups.slave

    Section 5 - Knowledge Base Deleting a UPS Slave Under Management, System Management, UPS Devices, select the IP address. Your selection will turn red. Click Delete. The DNS-345 will process your request. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 264

    Section 5 - Knowledge Base The IP address will no longer be listed in the table. D-Link ShareCenter Quattro DNS-345 User Manual...

  • Page 265

    For example, bonding two WAN links gives you load balancing and fault tolerance between them, but it does not double your upstream throughput, since each connection (such as a Web page HTTP request) has to take one or the other route. D-Link ShareCenter Quattro DNS-345 User Manual...

Comments to this Manuals

Symbols: 0
Latest comments: