Inserting Zn-Air Batteries (Tamperproof Cartridge) - ab Naida CI Q90 User Manual

Attach the battery cartridge to the Naída CI following the same instructions as attaching the
6
PowerCels to the Naída CI in the section

Inserting Zn-Air Batteries (Tamperproof Cartridge)

Use the same tool provided for T-Mic 2/
Earhook removal and replacement—Insert
the pointed end of the tool into the small
hole located on the spine of the Zn-Air
Battery Pak. Note: If you do not have the
tool present, any thin pointed device should
work to release the drawer.
Set the tool aside and grasp the Zn-Air
Battery Pak drawer with your hand and
gently pull it the rest of the way out.
To insert the batteries, follow instructions Step 2 to 5 of the previous section
1
3
Replacing the Battery.
With the tool inserted in the hole, gently
push in and downward until you feel
the Zn-Air Battery Pak drawer release
and the button of the Zn-Air Battery
Naída CI Q90 Sound Processor User Guide
2
Pak pops out.
Inserting Zn-Air Batteries.
47