Removing Headpiece Color Caps; Adjusting Controls On The Naída Ci Q90; Changing Programs - ab Naida CI Q90 User Manual

regarding adjustment of headpiece magnet strength.
Do not place additional magnets in the headpiece unless under the
WARNING:
direction of a cochlear hearing care professional.

Removing Headpiece Color Caps

The UHP Color Caps are available in a variety of colors to match or coordinate with the Naída
CI sound processor. A Color Cap must be in place at all times when using the headpiece.
Color Caps can be replaced to change the look and style of the headpiece. To remove the
headpiece Color Cap, only use the tool provided by Advanced Bionics. See the
UHP Instructions for Use or the Connecting Universal Headpiece (UHP)
additional information regarding removal and replacement of headpiece Color Caps.
Adjusting Controls on the Naída CI Q90

Changing Programs

The program button is located on the spine of the Naída CI to allow the recipient to easily
change the listening program during use. The Naída CI can store up to five programs for
optimal listening in a variety of situations. These programs can be updated and changed by
the hearing care professional during fitting.
Any changes made to volume or sensitivity will be carried over to subsequent program changes.
This applies to volume changes with either onboard volume controls or the AB myPilot remote
control, as well as to sensitivity changes made with the AB myPilot remote control.
To change programs:
Push the program button down briefly and then release the button. Through the push of the
button the programs will switch in a chronological order; after the final program, the user will
return back to the first program.
30
Naída CI Q90 Sound Processor User Guide
Program Button
Color Cap or
of this User Guide for