Table of Contents
Advertisement
Quick Links
Getting to Know Your ComPilot
The ComPilot connects your Naída CI processor (and/or
compatible Phonak hearing instrument) wirelessly to audio
devices for different applications. You can use your ComPilot to:
• Listen to music and TV
• Connect via Bluetooth to a cell phone, a Bluetooth
landline, or any Bluetooth-compatible device
• Access FM wirelessly
• Act as a remote control
• Listen to the voice of a caregiver or companion when
used with the RemoteMic
Setting Up and Using Your ComPilot
Charging the ComPilot
1.
Plug in the charger.
Power indicator:
Solid red: Charging, typically 90 minutes
Solid green: Battery fully charged
It is safe to leave the ComPilot connected to the charger overnight.
Note: When charging the ComPilot for the first time, leave it charging for at least three hours, even if the power indicator is not lit or turns green earlier.
Wearing the ComPilot
2.
Place the neckloop around your neck, making sure both neckloop plugs are securely connected to the
neckloop sockets.
Turning on the ComPilot
3.
Slide the power switch to turn the ComPilot ON.
The power indicator lights up green when the ComPilot is switched on and red when it is switched off.
ComPilot Quick Guide
1
Advertisement
Table of Contents
Related Manuals for ab ComPilot
Summary of Contents for ab ComPilot
-
Page 1: Getting To Know Your Compilot
It is safe to leave the ComPilot connected to the charger overnight. Note: When charging the ComPilot for the first time, leave it charging for at least three hours, even if the power indicator is not lit or turns green earlier. -
Page 2: Using Compilot With Fm
The ComPilot can be used with the Phonak MLxi FM receiver. a) With the ComPilot turned off, securely connect the FM receiver to the ComPilot. To avoid damage to the receiver and/or the ComPilot, take care to align the FM receiver pins with the holes on the ComPilot. - Page 3 If either device is switched off or moves out of range, it should reconnect when it comes back into range or is turned back on. Useful tip 2: It is possible to have multiple audio sources connected to the ComPilot. If this is the case, a phone call always has priority. You will hear the phone ringing even if listening to music streaming from the ComPilot.
- Page 4 Using the ComPilot as a Remote Control To use the ComPilot as a remote control, it must be configured with your Naída CI processor(s) by your audiologist. Once configured by your audiologist, the ComPilot will not communicate with a compatible Phonak hearing instrument.
Need help?
Do you have a question about the ComPilot and is the answer not in the manual?
Questions and answers