Logging In To The Hotspot; Possible Hotspot Scenarios; Discovery - Trango Systems Altum AC 600 User Manual

• User's MAC Address
• Download (DL) Speed (kbits/s)
• Upload (UL) Speed (kbits/s)
By default, there is an entry:
• User MAC Address
◦ All Others
• Download (DL) Speed (kbits/s)
◦ 5000
• Upload (UL) Speed (kbits/s)
◦ 5000
This means that all hotspot users are subjected to
5000 kbits/s bandwidth limitation. To prevent any
limitation, it may be set to a high value like 5000000
kbits/s.
Always Blocked User's List
You may add entries for: User's MAC Address.
These users would be blocked from accessing the
network.
This list works for all Hotspot Modes.
Authentication Free User's List
You may add entries for: User's MAC Address.
These users would not need any authentication at all
and can get immediate access to the network. For
example, the boss of the company could be in the
authentication free list.
This list works for all Hotspot Modes.
4.2.8 Logging in to the Hotspot
When a hotspot user opens an Internet browser on
his/her computer, it would automatically show the
hotspot login page. To quickly see the hotspot login
page, he/she could enter a simple URL in the Internet
browser e.g.
Altum AC 600 User Manual
• 1.0.0.1
• 8.8.8.8
• bing.com
When a user connects his/her mobile/smart phone to
the hotspot wireless network, the hotspot login page
should automatically appear. Otherwise, he/she could
open the default Internet browser app or Chrome app
on their mobile phone to see the login page.
4.2.9 Possible Hotspot Scenarios
The WAN interface could be set as one of the
Ethernet ports. This means that the wireless networks
provided by the hotspot would be in the LAN zone.
Users can connect within the LAN zone to see the
hotspot login page.
The wireless distribution system (WDS) can also be
used to increase the coverage. More information is
found in Section .
4.3 Discovery
Figure 35: The Services → Discovery page.
Enable: Allows the Device Name and Last IP address
of the wireless station to be discovered by the
wireless access point. The functionality is similar to
the Cisco Discovery Protocol. Discovery is enabled by
default.
LT‐9064 Rev A 21