Chapter 4: Services Tab; Dynamic Dns; Hotspot; Setting Up The Connections - Trango Systems Altum AC 600 User Manual

Wireless bridge with hotspot
Table of Contents

Advertisement

Chapter 4: 
The Services top‐level tab contains the configuration 
pages for Dynamic DNS, Hotspot, and Discovery. 
4.1  Dynamic DNS 
The domain name system (DNS) translates a URL like 
www.yahoo.com to an IP address like 206.190.36.45. 
Dynamic DNS (DDNS) allows the with the public IP 
address to be reached from the internet via a URL 
even if its IP address is dynamically changing. 
Figure 32: The Services → Dynamic DNS page.
Enable: Enables the dynamic DNS. 
Event interface: Chooses the interface, e.g. LAN or 
WAN, for which "interface up" would run the DDNS 
script process. 
Service: Chooses the DDNS service provider e.g. no‐
ip.com. 
Hostname: Specifies the hostname e.g. y0033.no‐
ip.biz. 
18 
Services Tab 
Username: Sets the username registered for the 
DDNS service. 
Password: Sets the password registered for the DDNS 
service. 
Source of IP Address: Configures the source of the IP 
address information. The default is URL. 
URL: Sets the URL of the source of the IP address 
information e.g. http://checkip.dyndns.com/. 
Check for changed IP every: The default is to check 
the IP address every 1 minute. 
Force update every: The default is to force update 
every 72 hours. 
4.2  Hotspot 
The Hotspot service allows you to control the access 
and usage of the Internet by connected devices. 
4.2.1  Setting up the Connections 
The following subsections contain advice on 
configuring the 2.4 GHz radio to implement the 
hotspot.  It is recommended to configure the LAN, 
Wifi, and WAN, then test it before enabling the 
hotspot setting. 
LAN Interface: DHCP Server 
It is recommended to enable the DHCP server, 
 
because network address translation (NAT) occurs 
between the WAN zone and the LAN zone. To do this, 
you may go to the Network → Interfaces → LAN (Edit) 
→ Physical Settings → DHCP Server section, then 
uncheck the option Ignore interface (Disable DHCP for 
this interface). 
Devices or computers that connect to the hotspot 
radio can then obtain their IP addresses automatically. 
In addition, the default gateway IP address and the 
DNS server IP address are automatically configured 
for these connected devices. 
LT‐9064 Rev A 
Altum AC 600 User Manual 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Altum AC 600 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents