C
F
LONING
EATURE
The cloning feature is used to program several scanners with the same settings.
To clone a scanner:
1.
Turn OFF the power to both scanners by unplugging the transformers.
2.
Connect the cloning cable (
3.
Turn ON the power to both scanners by plugging in the transformers.
4.
When each scanner is ready, scan the cloning bar code with the scanner
that has the settings that need to be transferred to the other scanner.
51-51544) between the two scanners.
MLPN
CLONING
1 2 3 4 5
7 7 7 7 7
0
6
5