Table of Contents
Advertisement
O
I
-C
M
O
F
MS860
PTIONAL
N
OUNTER
OUNTING
PTIONS
OR THE
Metrologic has designed three plates to accommodate in-counter installation of
the MS860. Included automatically with the purchase of the MS860 is Metrologic
part #45-45471, Installation Plate. The universal and replacement plates are
available for an additional charge. Contact the distributor, dealer or Metrologic
customer service representative to order one of these plates.
Metrologic Part Number mlpn 45-45471, Installation Plate:
This plate is designed for use in counters with no previous cutouts. No routing is
necessary for a flush fit as the stainless steel top is only .60mm (.024") thick. The
cut out measurements are 180.34 mm (7.1") L x 175.26 mm (6.9") W. The final
cut out must not be greater than 1.5mm (1/16") or less than the exact
measurement.
Metrologic Part Number mlpn 45-45474, Universal Plate:
This plate is designed to fit into an existing cut out up to 292.1 mm
(11.5") L x 508 mm (20") W.
Metrologic Part Number mlpn 45-45470, Replacement Plate:
This plate is designed to fit into a cut out that previously contained an MS260 or
MS362 scanner. This plate fits into the existing 293.62 mm (11.56") L x
245.36 mm (9.66") W.
11
Advertisement
Table of Contents
