Table of Contents
Advertisement
5 Troubleshooting
1) Terminal does not boot
If the terminal cannot boot after repeated pressing of the power switch when
connect to the power, the terminal power light remains off, the fan does not
operate, and the BIOS beeping is not heard, it might be power supply problems.
(a) Check the power adapter is plugged in correctly to the power outlet.
(b) Check the connection between the terminal and the power adapter, and
then re-boot the machine.
(c) If the terminal is working in high temperature environment that causes the
terminal automatically shut down in protection mode, please disconnect
the power of the machine.
dropped and restart.
(d) If the terminal does not boot after a sudden power failure or illegal
shutdown, unplug the adapter from the terminal, and press the power
button several times. Then plug in the adapter and boot again.
(e) If the adapter light blinks or go off, unplug the adapter immediately and do
not plugged in again. Contact with our products service center.
2) The terminal automatically restart (or shutdown)
If terminal is frequently automatic shutdown or auto-boot during operation (or
boot up),
(a) Check the power supply is connected properly; make sure the plug is not
loose and contacts are in good condition;
(b) Check if the AC line voltage is stable;
(c) A sudden power failure or improper shutdown may cause this problem.
Press F8 to boot system into safe mode and debug.
(d) If any new hardware is added or replaced that caused this problem, remove
the hardware and reboot;
(e) If the above steps do not resolve this problem, reinstall the operating
system.
Wait until environment temperature has
23
Advertisement
Table of Contents
