Table of Contents
Advertisement
"Check" and
"Battery" Displays
FOR SERVICE
In California, Call:
1Ð800Ð711Ð9252
In All Other States, Call:
1Ð800Ð4ÐWESTEC
* Not all systems use
wireless sensors.
TROUBLE CONDITIONS
The word CHECK on the keypad's display, accompanied by a "beeping" at the
keypad, indicates a trouble condition in the system.
To silence the beeping for these conditions, press any key.
1. A display of "CHECK" and one or more zone numbers indicates that a
problem exists with the displayed zone(s) and requires your attention. If the
CHECK display relates to a fire zone, CALL FOR SERVICE
IMMEDIATELY.
Determine if the zone(s) displayed are intact and make them so if they are
not. If the problem has been corrected, the display can be cleared if you enter
the OFF sequence (user code plus OFF key) twice. If the display persists,
CALL FOR SERVICE IMMEDIATELY .
2. If there are wireless sensors* in your system, the CHECK condition may
also be caused by some change in the environment that prevents the receiver
from hearing a particular sensor. CALL FOR SERVICE IMMEDIATELY if
this occurs.
TYPICAL
"CHECK" DISPLAY
10
CHECK
IF YOU CANNOT CORRECT A "CHECK" DISPLAY, OR IF IT IS FOR A FIRE ZONE, CALL
FOR SERVICE IMMEDIATELY.
–26–
AC
Advertisement
Table of Contents
